User manual LINKSYS WVC11B

[. . . ] ® A Division of Cisco Systems, Inc. 2. 4 GHz Wireless-B 802. 11b Internet Video Camera WIRELESS Model No. User Guide WVC11B Wireless-B Internet Video Camera Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. Copyright © 2003 Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. How to Use this Guide Your guide to the Wireless-B Internet Video Camera has been designed to make understanding networking with the Camera easier than ever. [. . . ] Your web browser will automatically start up, and you will visit a website to set up your SoloLink account. For more information, refer to "Chapter 7: Setting up the Linksys SoloLink DDNS Service, " which will guide you through setup of your SoloLink account. Enter the password you have set up on your SoloLink account. If you have forgotten your password, click Forgot your Password?The Password Request screen will appear, as shown in Figure 8-13. Click the Request Password button to request your username and password, which will be e-mailed to the e-mail address registered with your SoloLink DDNS account. Click the Cancel button to cancel your change. Click the Back button to return to the previous screen. Enter the host and domain name you have set up on your SoloLink account. It should be in this format: <Location ID>. ourlinksys. com. For example, if myhouse is the Location ID, then the host and domain name would be myhouse. ourlinksys. com. Enter the name you have given the Camera. Enter the number of the port you will use to remotely access the Camera. If you need to find an available port, click Find Available Port and follow the on-screen instructions. Depending on how often you want the DDNS service to update the dynamic IP address, select the appropriate time interval from the drop-down menu. To update the dynamic IP address immediately, click the Update Now button. Figure 8-12: New User Registration Figure 8-11: SoloLink DDNS Chapter 8: Using The Wireless-B Internet Video Camera's Web-based Utility Setup 47 Wireless-B Internet Video Camera Status Registration Status. The status of the Camera's registration is displayed here. To use the SoloLink DDNS service for the Camera, it must be registered with your SoloLink DDNS account. The status of the most recent DDNS service update is displayed here. You will be informed if the username and password authentication has been successful, as well as if the dynamic IP address has been updated. The date and time of the most recent IP address update attempt are displayed here. [. . . ] The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license for the system according to the Canadian regulations. EC DECLARATION OF CONFORMITY (EUROPE) Linksys Group declares that the Wireless-B Internet Video Camera conforms to the specifications listed below, following the provisions of the European R&TTE directive 1999/5/EC: For 11Mbps, 2. 4 GHz devices with 100 mW radios, the following standards were applied: · EN 301 489-1, 301 489-17 General EMC requirements for Radio equipment. · EN 609 50 Safety · ETS 300-328-2 Technical requirements for Radio equipment. Caution: This equipment is intended to be used in all EU and EFTA countries. [. . . ]