User manual LINKSYS WVC200

[. . . ] 2. 4 GHz Wireless-G 802. 11g WIRELESS PTZ Internet Camera with Audio User Guide Model No. WVC200 Wireless-G PTZ Internet Camera with Audio Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. Copyright © 2006 Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. How to Use this Guide This User Guide has been designed to make understanding networking with the Camera easier than ever. [. . . ] Netscape users should use the Viewer & Recorder Utility instead. A Security Warning screen about an OCX plug-in may appear. To enable your computer to see the Camera's video, click the Yes button. A screen will appear showing you the video from the Camera. Figure 7-3: View Video Screen NOTE: For added security, you should always change the Login Name and Password through the Utility's Users screen. Figure 7-4: Security Warning Screen Chapter 7: Using the Wireless-G Internet Camera's Web-based Utility View Video 42 Wireless-G PTZ Internet Camera with Audio Setup The Basic screen will appear. You have six tabs available: · Basic. To configure the Camera's basic, LAN, and wireless settings, use the Basic screen. Customize the video settings on the Image screen. Reset the Camera's factory defaults and upgrade the Camera's firmware from this tab. Designate user's level of access and manage passwords for the Camera on this screen. DDNS (Dynamic Domain Name System) lets you assign a fixed host and domain name to a dynamic Internet IP address. Manage the uploading of images to an FTP site from this tab. The e-mail alert options, Universal Plug and Play (UPnP) setting, and Alternate Port settings are configured on the Options screen. Set and calibrate the Camera's pan and tilt options from this screen. Status information and a log are displayed on this screen. To save your changes, click the Apply button. To cancel any unsaved changes, click the Cancel button. To get additional information about a screen's features, click the Help button. Basic The Basic screen allows you to alter the Camera's settings, including the network and wireless configuration. Device Settings Device ID. Displayed here is the Camera's identification name, which is used by the Camera and the Utility to exchange data. Unique, memorable names are helpful, especially if you are using multiple Cameras on the same wireless network. Enter information about the Camera in this field. This feature allows you enable or disable the Camera's LEDs. Chapter 7: Using the Wireless-G Internet Camera's Web-based Utility Setup Figure 7-5: Basic Screen 43 Wireless-G PTZ Internet Camera with Audio Date. [. . . ] · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ]