User manual LINKSYS X2000

[. . . ] 6 Connect your modem-router Set up your modem-router as only a router 6 7 Appendix: Linksys X2000 Advanced Settings X2000 . 17 3 Linksys X2000 Product Overview Product Overview Top Ethernet  If the LED is continuously lit, the Modem Router is successfully connected to a device through that port. Wi-Fi Protected Setup™ Button  Press this button to have Wi-Fi Protected Setup™ search for your Wi-Fi Protected Setup™-supported wireless device. The LED is continuously lit when a WiFi Protected Setup™ connection is successfully established. [. . . ] Wait until the light is continuously lit, before starting the next Wi-Fi Protected Setup session. Wi-Fi Protected Setup Button  Use this method if your client device has a Wi-Fi Protected Setup button. On the client device, enter the PIN listed on the router’s Wi-Fi Protected Setup screen. (It is also listed on the bottom of the router. After the client device has been configured, click OK on the router’s Wi-Fi Protected Setup screen within two minutes. For each wireless network, the Network Name (SSID), Security, and Passphrase are displayed at the bottom of the screen. Note If you have client devices that do not support Wi-Fi Protected Setup, note the wireless settings, and then manually configure those client devices. Advanced Configuration Office Options The office options are available for networks that use a RADIUS server for authentication. The office options are stronger than the personal options because WPA2 or WPA provides encryption while RADIUS provides authentication. Security Option WPA2 Enterprise WPA2/WPA Enterprise Mixed Mode WPA Enterprise RADIUS Strength Strongest WPA2: Strongest WPA: Strong Strong Basic Wireless > Wireless Security The wireless security settings configure the security of your wireless network(s). The router supports the following wireless security options: WPA2/WPA Mixed Mode, WPA2 Personal, WPA Personal, WPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA Enterprise, WEP, and RADIUS. ) Note To learn more about any field, click Help on the right side of the screen. Wireless Security Wireless security is strongly recommended, and WPA2 is the strongest method available. Use WPA2 if it is supported by all of your wireless devices. Security Mode Select the security option for your wireless network. Then go to the instructions for your selection. Personal Options Security Option WPA2 Personal WPA2/WPA Mixed Mode WPA Personal WEP Strength Strongest WPA2: Strongest WPA: Strong Strong Basic 14 Linksys X2000 WPA2/WPA Mixed Mode Note If you select WPA2/WPA Mixed Mode as your Security Mode, each device in your wireless network MUST use WPA2/WPA and the same passphrase. Advanced Configuration WPA Personal Note If you select WPA Personal as your Security Mode, each device in your wireless network MUST use WPA Personal and the same passphrase. If you used the setup software for installation, then the default is changed to a unique passphrase. If you used the setup software for installation, then the default is changed to a unique passphrase. WPA2 Personal Note If you select WPA2 Personal as your Security Mode, each device in your wireless network MUST use WPA2 Personal and the same passphrase. WPA2/WPA Enterprise Mixed Mode This option features WPA2/WPA used in coordination with a RADIUS server. [. . . ] Guest Access (Gasttoegang) Allow Guest Access (Gasttoegang toestaan)  Houd voor het toestaan van internettoegang via een gastnetwerk de standaardinstelling yes (Ja) aan. Then go to the instructions for your selection. Lampan blinkar när modemroutern kör självdiagnostikläget under starten When the diagnostic is complete, the LED is continuously lit. Kabel – Om du vill använda modemroutern som enbart router använder du en nätverkskabel till att ansluta den här porten till ett separat modems LAN/Ethernet-port. [. . . ]