User manual LIVARNO LESB 22 A1 ENERGY-SAVING FLOODLIGHT

[. . . ] Claims of any kind for damage resulting from unintended use will not be accepted. In the existing operation instructions the following warnings are used: DANGER A warning of this danger level indicates a threateningly dangerous situation If the dangerous situation is not avoided, it could lead to death or serious physical injury. Pay heed to the instructions in this warning to avoid the death of or serious physical injury to people. WARNING A warning of this danger level signifies a possible dangerous situation. [. . . ] NEVER use the light with a damaged cable. There will be the risk of a fatal electrical shock. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. The appliance is delivered with the following components as standard: Energy-Saving Floodlight Energy-Saving Bulb R7s / 22W Assembly material This operating manual NOTICE Check the contents to ensure everything is available and for signs of visible damage. If the delivery is not complete or is damaged due to defective packaging or through transportation contact the Service Hotline (see chapter Service). The appliance can be mounted indoors or in a covered outdoor area. DANGER Maintain a sufficient distance from the illuminated area (at least 1 m), otherwise there is a risk of fire from the generated heat. The motion detector 4 may be oriented at about 170° horizontally and about 180° vertically and has a detection range of max. When selecting the installation location ensure there will be no adverse incidents registered in the coverage range, such as from roads or lights. WARNING When drilling, take care not to damage any pipes/cables in the wall or ceiling. the supplied plugs are only suitable for a mounting on concrete or stone. Before starting the installation, please check your installation location carefully for its suitability for the plugs. NOTICE For easier installation the bracket 5 can be unscrewed from the appliance. Drill two holes with a diameter of 6 mm and a depth of 30 mm at a spacing of 68 mm. Insert a plug into each of the holes and screw the appliance with the bracket 5 to the ceiling or wall (see Fig Ceiling mounting/Wall mounting). The earth wire (green/yellow wire) must be connected to the point marked . unscrew the four screws at the rear of the connection box and remove the cover. First, pull a cable through the cable entry 9 into the connection box and secure it to the available cable strain relief. connect the cable to the terminals , as shown in the connection diagram. Replace the cover of the connection box and screw it down firmly. The adjustment of the range, the twilight level, and the illumination time is made with the rotary switches on the motion detector 4 . [. . . ] NOTICE The warranty covers only claims for material and manufacturing defects, but not for transport damages, wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial applications. In the event of misuse and improper handling, use of force and interference not carried out by our authorized service branch, the warranty will become void. Your statutory rights are not restricted in any way by this warranty. [. . . ]