User manual LIVARNO LLL 72 A1

[. . . ] This device is not intended for any other use or for uses beyond those mentioned. Claims of any kind for damage resulting from unintended use will not be excepted. In the current operating instructions the following warnings are used: DANGER A warning of this danger level indicates a life threatening dangerous situation. If the dangerous situation is not avoided it could lead to death or serious injuries. [. . . ] Do not use any optical instrument such as, for example, a magnifying glass to look directly into the light beam. The device is delivered with the following components as standard: LED Magnification lamp These operating instructions NOTICE Check the contents to make sure everything is there and for visible damage. WARNING Packaging materials must not be used as children's playthings. The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable. the recirculation of packaging into the material circuit saves on raw material and reduces generated waste. Dispose of packaging materials that are no longer needed according to the regionally established regulations. NOTICE If possible retain the device's original packaging during the warranty period so that, in the event of a warranty claim, the device can be properly packaged for return. IMPORTANT Before connection of the device compare the connection data (voltage and frequency) on the rating plate with that of your electric power circuit. This data must be compatible in order to avoid damage to the device. Make sure that the device's mains power cable 4 is undamaged and is not laying over hot surfaces and/or sharp edges. Make sure that the mains power cable 4 is not tightly stretched or kinked. Do not allow the mains power cable 4 to hang over corners (tripwire effect). Insert the plug into the mains power socket. Strap for opening of the magnifying glasses lid Lampshade's universal joint Joint with allen head screw for fixing the swivel arm Power Cable Pedestal with storage compartments On/Off switch In this section you receive important information regarding handling and operation of the device. Remove the allen key on the bottom of the pedestal 5 . Reattach the allen key to the bottom of the pedestal 5 . Look through the magnifying glass from above to see small objects enlarged under the lampshade. change the distance between the magnifying glass and the object to adjust the focus. When you no longer require the magnifying glass close the lid again. The following table will assist with localisation and remedying of minor malfunctions: Defect Device does not switch on. possible cause The plug is not inserted. Mains power socket is not supplying voltage. [. . . ] Please retain your receipt as proof of purchase. In the event of a warranty claim, please get in touch, by telephone, with our service department. Only in this way can a post-free dispatch for your goods be assured. NOTICE Warranty adjustments apply only to material or manufacturing defects not for transport damage, wear and tear or for damage to breakable parts such as lamps or switches. [. . . ]