User manual LOGICOM OLEA 552

[. . . ] You can download these instructions in pdf format at: www. logicom-europe. com OLEA 550/552/553 DECT telephone with answering machine and hands-free User manual Non contractual photo You must read this manual before using the device 1 We, LOGICOM 55, rue de Lisbonne 75008 Paris France Declare that the LOGICOM OLEA 550, OLEA 552 and OLEA 553 DECT telephone products with answering machine and hands-free are in compliance with the essential requirements applicable and in particular the requirements of guideline 1999/5/EC, which are as follows: Article 3. 1a - (protection of the user's health and security): - EN 60950-1/ A12:2011 Article 3. 1b - (protection requirements concerning electromagnetic compatibility): - EN 301 489-6 V1. 3. 1 (2008) - EN 301 489-1 V1. 9. 2 (2011) Article 3. 2 – (correct use of the radio frequency spectrum so as to avoid damaging interferences): - EN 301 406 V2. 1. 1 (2009) - RoHS 2 (2011/65/EU) We declare that the OLEA 550, OLEA 552 and OLEA 553 products are in compliance with the requirements related to European Standards for line interfaces. These devices are designed for use on German public switched telephone networks. This compliance applies as long as the product for which it is awarded is installed and used following the instructions provided in the user manual. Non-authorised modifications to the product cancel this declaration of compliance. [. . . ] Time setting: Select "SET TIME" 123 The time saved on the handset will appear on screen. If it is correct, press OK, if not you can modify it in the following order: Hour/Minutes using the alphanumeric keypad. A beep confirms the validation of the changes to the date and time. CAUTION: Time is set manually in the following order: hours then minutes, you can move from one figure to another using keys and . When setting the time, the telephone will not accept numbers of "23". If you wish to modify the time on your telephone from "15H00" to "20H00", you must change the second figure before changing the first, e. g. : "15H00" is displayed on the screen, Select the second figure from the hour section, "15H00" 123 Modify this figure using the alphanumeric keypad from "5" to "0". "10H00" is displayed on the screen, 23 x2 123 Select the first figure from the hour section, "10H00" Modify this figure using the alphanumeric keypad from "1" to "2". "20H00" is displayed on the screen, Validate the modification. This process must be used to set a time between "20H00" and "23H00" when the telephone displays a time between "14H00" and "19H00". 9 – Alarm If the alarm is activated, it will be triggered every day at the set alarm time. If the Snooze function is activated, when the alarm is triggered, even if you stop it, it will still be triggered every 7 minutes. Configuring the alarm function Enter the menu and, using the DOWN key, select the menu "HS SETTINGS» Select "ALARM" Activate or deactivate the alarm function 123 Enter the desired alarm time; a beep will confirm that the alarm is activated. "SNOOZE" is displayed on the screen Activate or deactivate the SNOOZE function, a beep indicates that the alarm time has been saved. The icon indicating that the alarm is activated. appears on the idle screen, Advanced telephone settings For all handset settings, your handset must be idle (no tone) 1 – Setting the PIN code It is necessary to enter the PIN code to access certain functions. The default pin code is: 0000 WARNING: If you wish to modify the default PIN code, be sure to write down the new PIN code. If forgotten, the warranty will not cover such an oversight. Enter the menu and, using the DOWN key, select the menu "BS SETTINGS" 24 Select "CHANGE PIN" 123 123 123 "PIN?-----" appears on screen, enter the PIN code using the alphanumeric keys (the default PIN code is 0000) "NEW PIN?-----" is displayed on the screen, type in the new PIN code. ----- " is displayed on the screen, type in the new PIN code a second time, a beep confirms the PIN code change. Note: When restoring the factory settings, the default PIN code (0000) is automatically reactivated. 2 – Manual registration of a handset with the base You can associate up to 5 handsets with the base. • Press down the registration key located on the base for 10 seconds (Refer to chapter "Description de la base"). Follow the registration procedure for the handset to be associated. Procedure for manual registration of a OLEA handset with the base Enter the menu and use the DOWN key to select the "REGISTRATION" menu 123 "PIN?-----" appears on screen, enter the PIN code using the alphanumeric keys (the default PIN code is 0000) "WAIT" is displayed on the screen. [. . . ] However, to avoid any form of damage, it is wise to not place the device on veneered or aged wood. • Do not stand your product on carpets or other surfaces which generate fibres, or place it in locations preventing the free flow of air over its surfaces. • Do not submerge any part of your product in water and do not use it in damp or humid conditions, such as bathrooms. • Do not expose your product to fire, explosive or other hazardous conditions. [. . . ]