User manual LOGITECH G51

[. . . ] Unplug this apparatus during lightning storms or when unused for long periods of time. refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug damage, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. The apparatus shall be disconnected from the mains by placing the power/standby switch in the standby position and unplugging the power cord of the apparatus from the AC mains receptacle. [. . . ] Level This button allows you to adjust the following levels: system volume, subwoofer volume, rear volume, and center channel volume. Press the level button to scroll through the options and use the system volume knob to adjust the levels. Center Adjusts the volume level of the center channel speaker. Matrix Surround Sound Toggles between Matrix gaming mode, Matrix music mode and off. Use this button when you want to create 5. 1 surround sound from 2-channel stereo sources like music and video game consoles. Headphone/Headset Jacks If using only headphones, plug the headphone jack into the headphone connector on the precision control center. When headphones are plugged into the G51 system, the speakers will mute automatically for private listening. If using a headset, plug the headphone jack into the headphone connector and the microphone jack into the microphone connector on the precision control center. When headphones are plugged in, the audio will mute in the headphones. Note: When using headphones to listen to a surround sound game or movie only the front left and right audio signals can be heard. To mix all 6 channels into the headphones, you will need to change your audio output to 2-channel stereo in your game or movie application. The G51 speakers support Dolby® Digital and DTS® sound on your PC if your 6-channel or greater sound card or DVD software can decode a Dolby® Digital or DTS® soundtrack. You can customize the satellite speakers by adding your own artwork. Make any necessary adjustments to the image. Cut out the image using the provided lines as a guide. Gently lift off the clear plastic cover. Gently cover the artwork with the clear plastic cover. Screw the wings back onto the sides of each satellite speaker. The center channel speaker can be mounted on top of a flat-panel LCD monitor. Swivel the center channel base back and make sure the lip under the front of the speaker is touching the front of the LCD monitor. Then, swivel the base back until it is touching the back of the LCD monitor and tighten the hinge screw for a secure fit (do not over-tighten). [. . . ] Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Consumers have legal rights under applicable national legislation governing the sale of consumer goods. Such rights are not affected by the warranties in this Limited Warranty. No Logitech dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. [. . . ]