User manual LOGITECH HD WEBCAM C525

[. . . ] 3-14 Using the Screen Adjustment Menu (OSD: On Screen Display) . 3-15 INSTALLING THE SOFTWARE Natural Color . 4-3 TROUBLESHOOTING Monitor Self-Diagnosis . 5-3 MORE INFORMATION Specifications . [. . . ] Insert the driver installation CD-ROM into the CD-ROM drive. Select the model of your product from the model list. 4. Complete the remaining installation steps according to the instructions displayed on the screen. Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information, refer to the document about the Windows operating system. Using the product 3-13 3-14 Product Operating Buttons Product Operating Buttons Touch them lightly with your fingers to use them. ICON DESCRIPTION Press this button to view the On Screen Display (OSD). This button is also used to exit the OSD or to return to a higher-level OSD menu * OSD Adjustment Lock This function locks the OSD in order to maintain the current settings or to prevent the settings from being changed by another person On: If you press and hold the MENU button down for 5 seconds, the OSD Adjustment Lock function is activated. Off: If you press and hold the MENU button down for 5 seconds again, the OSD Adjustment Lock function is disabled. Even if the OSD Adjustment Lock function is activated, users can adjust the brightness and contrast and can set up the adjustment function assigned to the [ ]. / Use these buttons to navigate the menu or to adjust a value in the OSD. Users can set the Customized Key to one of the following functions. This menu is unavailable when <MagicAngle> or <MagicEco> is set. · · · · MagicAngle This feature allows you to see optimal screen quality according to your viewing position. When viewing the screen at an angle from below, above or the side of the monitor, by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front. Set to <Off> when viewing directly in front of the screen. · · · · · · <Off> - Select when viewing from the front position. - Select when viewing from a slightly lower position. - Select when viewing from the lower position. -Select when viewing from the upper position. <Lean Back Mode1> <Lean Back Mode2> <Standing Mode> <Side Mode> - Select when viewing from the left or right position. <Custom> -When <Custom> is selected, settings for <Lean Back Mode 1> is applied by default. Users can set suitable picture quality as needed. This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> or <Cinema> mode. This menu is unavailable when <MagicColor> or <Color Effect> is set. Using the product 3-15 MENU Coarse DESCRIPTION Removes vertical noise lines (line pattern) from the screen. The location of the screen may be changed after the adjustment. In this case, move the screen so that the screen is displayed at the center of the display panel using the <H-Position> menu. [. . . ] Since the standard voltage may differ from country to country, please check the label on the back of the product. 15pin-to-15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable Dimensions (WxHxD) / Weight (Simple stand) 523. 4 x 378. 4 x 66. 9 mm / 20. 6 x 14. 9 x 2. 6 inches (Without Stand) 523. 4 x 422. 8 x 197. 0 mm / 20. 6 x 16. 6 x 7. 8 inches / 4. 65 kg / 10. 25 Ibs (With Stand) Temperature : 50°F ~ 104°F (10°C ~ 40°C) Humidity :10 % ~ 80 %, non-condensing Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Humidity : 5 % ~ 95 %, non-condensing Tilt 0° (±1°)~20° (±1°) B2230W Environmental considerations Operating Class B (Information Communication equipment for residential use) This device has been registered regarding EMI for home use (Class B). (Class B equipment emits less electromagnetic waves than Class A equipment. ) 6-17 More Information 6-18 Power Saving Function This product provides a power saving function that automatically turns the screen off when the product is not used for a predetermined period of time to reduce power consumption. If the product enters power saving mode, the power LED turns to a different color to indicate that the product is in power saving mode. [. . . ]