User manual LORUS W620

[. . . ] W620] Graphic display Mon th Date 3 . Selection of the digits to be adjusted (flashing) is made in the following order by depressing button "C". S e c on d s Stopwatch operation Depress button "A" to show the stopwatch display. Accumulated elapsed time measurement Start C B "A"(AM)/ "P"(PM) mark A Display marks E Min u tes C Day S ec on d s D Hourly time signal mark Alarm mark Mi n u t e s Hour Date 12- or 24-hour i n d i c a t i on Year Month Stop C Restart C 4. [. . . ] The newest measurement stored in memory is displayed. With each depression of button "D", the stored data are recalled successively from the oldest to the newest. N o t e : Even if the digits are reset to "00" in the stopwatch measurement, stored data is not erased and can be recalled unless a new measurement is started. S tart Number of strokes per minute Timer display ma r k 4 . Depress button "D" to set the digits. One digit is advanced with each depression of the button. The digits move quickly by keeping the button depressed. After all the adjustments are completed, depress button "B" to return to the timer display. The time you have set remains displayed. * If button "D" is depressed while the time you have set is displayed, the set time will be canceled and the preset time 3 minutes will be shown. N o t e : If the watch is left untouched in the adjustable timer setting display with the digits flashing, it will automatically return to the timer display in 2 to 3 minutes. Adjustable timer operation Refer to "Preset timer operation" above. Selection of the preset time 1. Depress button "A" to show the timer display. Depress button "D" to select the desired preset time. Selection of the preset time is made in the following order by depressing button "D". 20 min. 1st sroke 2nd stroke 3rd stroke S top Notes: 1. The measurable number of strokes per minute is between 18 and 240. If the measurement is stopped within 0. 75 seconds after it is started by depressing button "C", "- - -" is displayed. If the measurement is not stopped after more than 10 seconds have elapsed, "Err" will automatically appear. 45 min. 30 min. s HOW TO SET THE ALARM · The alarm can be set to ring on a 24-hour basis. At the designated time, the display is illuminated as the alarm rings. Current time * The preset time does not include 25 minutes. [. . . ] If a child swallows it, consult a doctor immediately. If the electroluminescent light is used continuously for a long time, the battery life may be less than the specified period. (dial, hands, buttons, case, bezel, strap, etc. ) 10-94 112L1 · With each depression of button "C" in the alarm display, the alarm is engaged and disengaged alter na t ely. s LUMIBRITE WATCH NO YES YES NO NO YES NO NO NO NO NO NO WATER RESISTANT ( 100 M/ * 10 BAR or above ) YES YES YES NO * If your watch is 200 M/20 BAR, 100 M/10 BAR or 50 M/5 BAR water resistant, it is so indicated on the dial/case back. · Do not operate the buttons when the watch is wet. · If the watch is exposed to salt water, rinse it in fresh water and then wipe it thoroughly dry. [. . . ]