Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual LOWRANCE LMS-480M ADDENDUM. We hope that this LOWRANCE LMS-480M ADDENDUM user guide will be useful to you.
Lastmanuals help download the user guide LOWRANCE LMS-480M ADDENDUM.
Manual abstract: user guide LOWRANCE LMS-480M ADDENDUM
Detailed instructions for use are in the User's Guide.
[. . . ] 988-0151-182
Addendum I
LMS-480M, LMS-480DF & GlobalMap® 4800M
This addendum addresses new items packed with your unit, changes to installation procedures, and NMEA 2000 ® upgrades not documented in the LMS 480M, LMS-480cDF and GlobalMap 4800M manuals. Your unit now packs with a 2-foot (61 cm) blue-to-red adapter cable, 15foot (4. 6 m) extension cable, LGC-3000 GPS module, double T connector and two 120-ohm terminators. The segment covering changes in installation procedures provides new backcase diagrams and information on how to add your unit to a new NMEA 2000 standard DeviceNet network. The upgrades covered in this document include information on the new LGC-3000 and instructions on how to configure and calibrate NMEA 2000 devices through the NMEA 2000 menu. [. . . ] Other fuel flows on the network will not be affected. 20
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight Synchronization. Highlight BUS SETUP and press ENT, which will open the Bus Configuration menu. A list of network devices will be at the top of the page. Use to select the desired fuel flow and press ENT. The Device Configuration menu will appear. Highlight ADVANCED OPTIONS and press ENT. The following message will appear: Are you sure you wish to change this device's configuration?Press EXIT repeatedly to get back to the main display. EP-15 Fluid Level Configuration NMEA 2000 menu will appear with five options: Bus Setup, Fuel Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight Synchronization. Highlight BUS SETUP and press ENT, which will open the Bus Configuration menu. A list of network devices will be at the top of the page. Select a fluid level you want to rename and press ENT. The Device Configuration menu will appear with the Device Name dialog box highlighted. Press ENT and use , to input the desired name for the fluid level. Press EXIT repeatedly to get back to the main display.
To select Tank Instance (Location): 1. Press MENU| MENU, use to select NMEA 2000 and press ENT. Press MENU| MENU, use to select NMEA 2000 and press ENT. Press MENU| MENU, use to select NMEA 2000 and press ENT. The
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight Synchronization. Highlight BUS SETUP and press ENT, which will open the Bus Configuration menu. A list of network devices will be at the top of the page. [. . . ] The following message will appear: Do you wish to re-calibrate the device?Press EXIT repeatedly to get back to the main display. Bennett Trim Tabs Calibration Trim Tabs will be calibrated through their Device Configuration menu.
To calibrate Trim Tabs: 1. Press MENU|MENU, select BUS SETUP and press ENT. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LOWRANCE LMS-480M ADDENDUM
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual LOWRANCE LMS-480M ADDENDUM will begin.
