User manual LOWRANCE LVR-250 INSTALLATION GUIDE

[. . . ] 988-0158-051 www. lowrance. com LVR-250 VHF Radio Installation and Operation Instructions Copyright © 2007 Navico All rights reserved. Lowrance® is a registered trademark of Navico No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited. Lowrance Electronics may find it necessary to change or end our policies, regulations, and special offers at any time. [. . . ] If you make an error, press - until < appears, then press ENT to backup and correct the entry. 30 Lowrance - LVR-250 Installation and Operation Instructions 3. 4. Press ENT to store your user MMSI. Enter your user MMSI again as a password check, then press ENT to permanently store the user MMSI and return to the menu. You can view your stored user MMSI at anytime by selecting USER MMSI in the main menu. 4-3 Maintain Your Groups (GROUP SETUP) Use GROUP SETUP to create, edit, or delete 1, 2, or 3 groups of frequently called people stored in alphanumeric order. A group MMSI always starts with 0. 4-3-1 Create a Group (GROUP SETUP) DSC SETUP USER MMSI >GROUP SETUP INDIV REPLY 1. GROUP SETUP >MANUAL NEW 000000000 GROUP NAME ­­­­­­­­­­­­ GROUP MMSI 0­­­­­­­­ FISHER1 012345678 >STORE CANCEL Select DSC SETUP, then GROUP SETUP. If this is the first time that you are entering a group name, a line of nine zeros appears. Otherwise, any existing group names are displayed. Enter the group name along the dashed line. Press ENT to confirm each correct entry and to move to the next digit. When you have finished, press ENT repeatedly until the cursor moves to the MMSI line. If you make an error, press - until < appears, then press ENT to backup and correct the entry. 3. 4. (Note that the first number is always 0. ) Press ENT. The group name and group MMSI are shown in a confirmation screen. Press ENT to store the details and return to the GROUP SETUP screen. 4-3-2 Edit Group Name Details GROUP SETUP MANUAL NEW >FISHER1 FRIENDS1 1. FISHER1 >EDIT DELETE EDIT NAME FISHER1 EDIT MMSI 012345678 FISHER2 012345678 >STORE CANCEL Select DSC SETUP, then GROUP SETUP. Press + or - to scroll to the incorrect entry then press ENT. The group name details are displayed, with the cursor at the first character of the name. Lowrance - LVR-250 Installation and Operation Instructions 31 3. 5. Edit the buddy name or, to edit only the MMSI, press ENT repeatedly until the cursor moves to the MMSI line. When you are finished, press ENT (repeatedly if necessary) to display the next screen. Press ENT to store the changes and return to the GROUP SETUP screen. 4-3-3 Delete a Group GROUP SETUP MANUAL NEW >FISHER2 FRIENDS1 FISHER2 EDIT >DELETE DELETE GROUP FISHER2 >YES NO 1. 4. Select DSC SETUP, then GROUP SETUP. [. . . ] Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number: 800-661-3983 905-629-1614 (not toll-free) 8 a. m. Eastern Standard Time, M-F Outside Canada and the USA If you have technical, return or repair questions, contact the dealer in the country where you purchased your unit. [. . . ]