User manual LUX N24

[. . . ] Everybody using the water purifier should be familiar with how to operate it and its safety features The manual should be kept and stay with the water purifier. If it is ever moved or changes owners, the user of the appliance should be able to read about the various functions and safety instructions. The user manual's English instructions begin on page 3. Vielen Dank, daß Sie unseren Wasseraufbereiter gewählt haben. [. . . ] After the disinfection the filter has to be changed. The disinfectant, sodium hypochlorite (concentration approx. 3. 5%, odourless), can be purchased from supermarkets or chemists. The disinfectant must be kept out of reach of children!Check that the water purifier is in standby mode. Press the service button, using a pen, until the service light comes on. The light on the faucet now flashes rapidly for 15 seconds. This prevents flushing from taking place during disinfection. Disconnect the filter container in accordance with «Replacing the filter», points 2 - 5. Remove the filter and discard it (should not be saved). Fill the container with 7 dl of lukewarm water and pour in 1/4 dl of disinfectant. The water purifier is put into storage and can be kept in this way without the risk of freezing. On reinstallation, the water purifier should: q stand somewhere where the temperature is above +5° C for at least 48 hours. be supplied with a new filter, see «Replacing the filter». be flushed in order to wash out the preserving agent, in accordance with «Flushing». Don't forget to insert a new filter in the water purifier. q q - 11 - Maintenance Cleaning the grid The grid blocks larger particles and is situated in the feed water connection. If the flow is reduced or the purifier makes a noise, the grid may be blocked. Check that the water purifier is in standby mode. Close the shut-off valve at the feed water connection. Unscrew the feed water hose from the water purifier. Using pliers or similar, grip and pull out the grid in accordance with fig. Remember which way the grid is installed. Reinsert the grid in the feed water connection using the pliers. [. . . ] We recommend connection using a plug, as some operations require the power supply to be temporarily interrupted. The plug should also be easily accessible after installation. - 17 - Installation Connecting the water purifier Before the water purifier is placed in its intended position, remove the plug at the end of the reject water hose and the two plugs in the connections on the purifier, see fig. Connect the two hoses and the faucet cord to the appliance as shown in fig. Screw the bent end of the feed water hose onto the water purifier. [. . . ]