User manual M-AUDIO PROJECTMIX

[. . . ] Control Surface with Motorized Faders and 18 x 14 Audio Interface User Guide English English Français Deutsch Español Italiano To access the multi-language version of this manual, please refer to the Driver CD, or visit the Support section of www. m-audio. com to download the latest edition. Pour accéder à la version multi-languages de ce manuel, veuillez vous référer au CD des pilotes ou visiter la section Assistance de notre site internet www. m-audio. fr pour télécharger la dernière version. Das Benutzerhandbuch in weiteren Sprachen finden Sie auf der Treiber CD oder besuchen Sie den Support-Bereich auf unserer Internetseite www. m-audio. com um sich die neueste Version des Handbuches herunterzuladen. Para acceder a la versión multi-lenguaje de este manual, por favor búsquela en el CD de drivers o visite la sección de soporte de www. m-audio. com para descargar la más reciente edición. Per accedere alla versione multi-lingua di questo manuale, si prega di fare riferimento al CD dei Driver oppure visitare la sezione Support del sito www. m-audio. com <http://www. m-audio. com> per poter scaricare l' ultima edizione disponibile. CD-ROM M-Audio (www. m-audio. com) © 2005 Avid Technology, Inc. Product features, specifications, system requirements, and availability are subject to change without notice. Avid, Pro Tools, and M-Audio are registered trademarks of Avid Technology, Inc. All other trademarks contained herein are the property of their respective owners. [. . . ] To get a fixed "fine scrub" resolution regardless of current zoom level, press ALT while scrubbing. Pro Tools Mode 19 To exit Scrub mode, do any of the following: · Press STOP or SCRUB on ProjectMix I/O. · Press any other transport button (RWD, FF, STOP, PLAY, REC). Shift Button (SHIFT) The SHIFT button functions as an OPTION button in Pro Tools. Transport Buttons (RWD, FF, STOP, PLAY, REC) When the Audio During Fast Forward/Rewind option is selected in the Operation Preferences of Pro Tools, you will hear scanned audio (as on a CD player) during rewind and fast forward. If the Audio During Fast Forward/Rewind option is not selected, you can continuously rewind or fast forward by holding down the corresponding RWD or FF button. You can also rewind or fast forward incrementally by repeatedly clicking the corresponding button. The size of these increments depends on which Display mode is currently selected: < Bars/Beats: Moves to start of previous or next bar. < Timecode: Moves in one-frame increments. < Samples: Moves in one-sample increments. < Min/Sec: Moves in one-second increments. < Feet Frames: Moves in one-foot increments. Cubase Mode To enter Cubase mode: Hold down the AUX 2 button while powering on the unit. The mode will be confirmed in the LCD display when the ProjectMix I/O has initialized. Cubase mode will also work with Steinberg's Nuendo software. PC Setup: With the ProjectMix I/O in Cubase mode, launch the application and choose Device Setup from the Device menu. Next, click on the Add/Remove tab and a list of products will appear. Click on Mackie Control, then click Add. Click on the Setup tab and click Mackie Control in the left column. Choose Control for both the input and output MIDI ports. Then select VST Audio Bay and set the Master ASIO Driver to ProjectMix Multichannel, then click Apply. You can then close the Device Setup window and the ProjectMix I/O will now control Cubase. Mac Setup: With the Project Mix I/O in Cubase mode, launch the application and choose Device Setup from the Device menu. Select the + sign in the upper left corner of the Device Setup window. Click on Mackie Control to display the Controller Setup window. Choose Control for both the input and output MIDI ports. Then select VST Audio Bay and set the Master ASIO Driver to ProjectMix Multichannel, then click Apply. [. . . ] To see your current control surface firmware version, simply turn off the ProjectMix I/O and turn it back on. The version will be displayed on the LCD screen during initialization. Write this number down for reference. Using ProjectMix Control 41 You'll start the control surface firmware updater by clicking OPTIONS in the upper-left corner of the ProjectMix Control window. Then click on Update Firmware within the pop-up menu. Once you select Update Firmware, the Firmware Updater will launch. Before you click Update, take a look at the version number displayed in the title bar. [. . . ]