User manual MACH SPEED TRIO SURF

[. . . ] However, if you find any mistakes or omissions, please feel free to contact us with your comments. If you have any problems while using this product, please contact our technical department at mssupport@machspeed. com. We appreciate your support and cooperation. Mach Speed Technologies is not responsible for any loss of personal data or damage caused by a malfunction of the hardware, firmware, physical damage, or improper working conditions. [. . . ] Powering off your player To power off your TRIO SURF, please disconnect the earphones from jack 2, and press the ­ button for 5 seconds. Once powered off, please do not reconnect the earphones for at least 10 seconds, or the player will not power back on until you have recharged the player. IV. Earphones Note- to extend the life of your TRIO SURF's earphones, we recommend never submerging the player or earphones into any liquid other than water, or to submerge the earphones when not properly inserted in the ears. Always ensure that there is no water in the earphones before inserting into your ears. Note- Included in your package is a second set of earbuds. Please note that these extra earbuds are NOT waterproof and not meant to be used in the water. To provide quality underwater sound, the earphones should fit over the top of your ear, using the ear to hold it properly in place, as shown in the picture below. The earphones should be inserted comfortably in the ear to create a watertight seal. Please make any adjustments to the earphones before submerging. When worn properly, the earphones should be comfortable, and create a watertight seal in your ears. The earphone arms should be located on top of, and behind the ears, going around the back of your head, and the wire connecting to jack 2 of the player should be hanging down the back of your neck. (see images below) V. Transferring files/computer usage There are two methods of transferring songs to the MP3 player: Using Windows Media Player, and the copy and paste method. Connect the MP3 player to a working USB port 2. When the player is connected to your computer, it will create a gray and green icon in the system tray (lower right hand corner of your desktop). The icon will be called safely remove hardware. 3. Go to the "My Computer" section of your computer. In there you will find a section called "Devices with Removable Storage" 4. Locate the drive created by the unit, generally just called Removable Disk, with a letter in parenthesis. Drive letters vary depending on your system configuration. 5. Open the drive by either double left clicking on the drive itself, or by right clicking on the drive, then left clicking on the "Open" option on the menu. 6. Locate the music stored on your computer. [. . . ] Simply drag your MP3 files to the device. Disconnecting the Player from your computer Before disconnecting your player from your computer, It is important to properly eject the player using the "safely remove hardware" feature of your windows operating system. 1. Left click on the gray and green icon in the system tray (lower right hand corner of your desktop). The icon will be called safely remove hardware. 2. Once you have clicked this icon, you can select which drive to disconnect from the computer 3. [. . . ]