User manual MACKIE HDRPRO

[. . . ] ATTENTION -- Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant las limites applicables aux appareils numériques de class A/de class B (selon le cas) prescrites dans le réglement sur le brouillage radioélectrique édicté par les ministere des communications du Canada. FCC Information NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ATTENTION: POUR EVITER LES RISQUES DE CHOC ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE. [. . . ] Copy the newly created Pro Tools Session to your Pro Tools drive and you're ready to wield your Pro Tools magic on your HDR24/96 recorded digital audio tracks. The first step in using HDR Pro is installing the software in the HDR24/96. Licensing It is necessary to authorize the software in order to use the "Import/Export Pro Tools" feature. To authorize the software: · Click the Licensing icon in the Setup window. Installing the Software 1) With the HDR24/96 powered off, insert installation Disk 1 into the HDR24/96 floppy drive, and power the HDR24/96 up. 2) The HDR24/96 will boot into the installer program automatically. 3) Insert Disk 2 into the floppy drive when prompted, and select "Continue. " 4) When the HDR24/96 has completed reading both installer disks, it will ask you if you want to install HDR Pro 1. 4. Click "OK" to finish the installation, or "Cancel" to cancel without writing any files to disk. 5) When the installation is complete, remove Disk 2 from the floppy drive, turn the HDR24/96 off, and then turn it back on again to begin using the new software. Please write your serial number here for future reference: Unlock procedure 1. Locate the HDR's Electronic Serial Number (ESN). This is displayed at the bottom of the Licensing window. The 12 digit ESN is made from numbers 0-9 and letters A-F. Locate the HDR software upgrade serial number, which is printed on the floppy disk label. To obtain the unlock code, have the ESN and software upgrade serial number ready. Then you have two options: · Log on to the Mackie authorization web page at: http://www. mackie. com/HDRauthorize, or · Phone Mackie Tech Support at: 800-258-6883 (425-487-4333 outside the U. S. ) 4. When you have obtained an unlock code, click Authorize in the Licensing window and enter your unlock code in the UNLOCK CODE box. Click Enter, reboot the HDR, and enjoy your newly expanded software. Purchased at: Date Of Purchase: User's Guide 3 HDR Pro Exporting HDR Projects in Pro Tools Session Format To export an HDR Project as a Pro Tools Session from the GUI: 4. Click the box under Audio Files to select the file format for the audio files. Pro Tools v3. x and 4. x use SD-II only, while Pro Tools v5. x can use SD-II, Wave, and AIFF files. 1. Click New to save the new Pro Tools Session. The more audio files there are in the Project, the longer it takes to export. When the export process is complete, an alert message informs you that the Session files are saved to the "Pro Tools Export" folder. 2. In the Export ProTools Session dialog box, you can enter a name for the Session. [. . . ] The key locks the drive into place and powers the tray. 3. Call Mackie Tech Support at 800-258-6883 (8 AM to 5 PM, Pacific Time) to explain the problem. If it can't be solved over the phone, you will be issued an RA (Return Authorization) number. You must have an RA number before you can obtain service from the factory. [. . . ]