User manual MACKIE PPM406M DATASHEET

[. . . ] PPM 406M The PPMTM Series mixers are comprised of three Six Channel Monaural Powered Mixer Like all Mackie mixers, the PPM Series mixers are designed for rugged, day-in and day-out road use. Their sturdy composite-molded case houses rugged, double-sided SMT-plated fiberglass circuit boards. [. . . ] Left and right RCA tape inputs are provided with an adjacent input level control for connecting a tape deck or CD player. Both the Monitor Master and Main Master rotary controls have corresponding EFX controls to mix the effects signal with the monitor and main outputs. Eight LEDs indicate the output signal level for each main and monitor output. Outputs include a 1/4" TRS mixer line output, a 1/4" TRS monitor line output, and left and right RCA tape line outputs. (continued on page 6) Applications Restaurants and Bars Meeting Rooms Churches/Sanctuaries Outdoor Gatherings Related Products PPM 808M and PPM 808S 1 OF 2 PAGES 1 OF 6 PAGES PPM 406M compact powered mixers, designed for portable live sound applications. Each powered mixer in the PPM Series has two graphic equalizers, built-in stereo digital effects with 16 presets, and two FR Series HighCurrent power amplifiers. MIXER PPM 406M MIXER PPM 406M Mixer Section Frequency Response Mic Input to Main Mixer Output (Trim at 0 dB): +0, ­1 dB, 32 Hz to 20 kHz +0, ­3 dB, 16 Hz to 80 kHz Mic Input to Power Amp Output @ rated power output: +0, ­1 dB, 32 Hz to 20 kHz +0, ­3 dB, 16 Hz to 55 kHz Distortion THD and SMPTE IMD; 20 Hz to 20 kHz Mic Input to Main Mixer Output: < 0. 005% @ +4 dBu output Mic Input to Power Amp Output: < 0. 15%, 250 mW to rated power Common Mode Rejection Ration (CMRR) 60 dB @ 1 kHz, Trim @ 0 dB Noise 20 Hz to 20 kHz BW (150 source impedance) Equivalent Input Noise (EIN): ­127 dBu Residual Output Noise: Main Mixer, Monitor, & Effects outputs Channel & Master levels off ­95 dBu Main Mixer Output Noise: Master @ nominal (­10 dB), all channels off ­92 dBu Master & 1 input channel @ nominal (­10 dB & ­20 dB), Trim @ 0 dB ­85 dBu Crosstalk Adjacent Inputs or Input to Output: Fader Off Break Switch Mute Input Level Trim Control Range 0 to ­40 dB Phantom Power +15 Vdc Equalization Rumble Reduction: 75 Hz, ­18 dB/octave Channel EQ: High ±15 dB @ 12 kHz Mid ±12 dB @ 2. 5 kHz Low ±15 dB @ 80 Hz Graphic EQ (9 bands): Q = 1. 414, ISO octave centers ±15 dB @ 63, 125, 250, 500 1 k, 2 k, 4 k, 8 k, 16 kHz ­90 dB @ 1 kHz ­90 dB @ 1 kHz ­80 dB @ 1 kHz Powered Mixer Main Mixer Section Rated Output Main Mixer, Monitor, & Effects: Maximum Main Mixer Section Output: PPM 406M Technical Specifications +4 dBu +20 dBu PPM 406M Maximum Input Levels Mic Input: ­20 dBu, Trim @ 0 dB (HI) +20 dBu, Trim @ 40 dB (LOW) Line Input: 0 dBu, Trim @ 0 dB (HI) +40 dBu, Trim @ 40 dB (LOW) Insert Input: +20 dBu Tape Input: +20 dBu Effects Return: +20 dBu Power Amp In: +22 dBu Input Sensitivity Minimum Input Level to produce +4 dBu @ Main Mixer Output Mic Input: ­68 dBu Insert Input: ­28 dBu Line Input: ­48 dBu Tape Input: ­18 dBu Effects Return: ­18 dBu Maximum Voltage Gain Mic Input to Insert Output: Tape Output: Main Mixer Output: Line Input to Insert Output: Tape Output: Main Mixer Output: Tape Input to Tape Output: Main Mixer Output: Effects Return to Main Mixer Output: Monitor Output: Input Impedance Mic Input: Insert Input: Line Input: Tape Input: Effect Return: Power Amp In: 40 dB 60 dB 72 dB 20 dB 20 dB 52 dB 10 dB 22 dB 22 dB 22 dB 3 k, balanced 10 k, unbalanced 40 k, balanced 10 k, unbalanced 10 k, unbalanced 10 k, unbalanced 2 OF 6 PAGES PPM 406M Output Impedance Main Mixer Output: Insert Output: Tape Output: Monitor Output: Effects Send: Power Amp Out: Digital Effects Resolution: Sample Rate: Bandwidth: 150 150 150 150 150 0. 032 @ 1 kHz 16-bit, 2-channel 31. 25 kHz 15. 6 kHz Powered Mixer Damping Factor > 250 @ 1 kHz Amp Input Impedance 10 k unbalanced, 20 k balanced Input Sensitivity 1. 35 volts (+4. 8 dBu) for rated power into 4 ohms Gain (Amp In to Speaker Out) 26. 4 dB (21 V/V) Maximum Input Level 9. 75 volts (+22 dBu) Rise Time < 5 µs Slew Rate > 40 V/µs High Frequency Overload and Latching: No latch up at any frequency or level. High Frequency Stability: Unconditionally stable, driving any reactive or capacitive load Turn On Delay: 3 seconds AC Power Requirements United States: 120 Vac, 60 Hz Europe: 240 Vac, 50 Hz Japan: 100 Vac, 50/60 Hz Korea: 220 Vac, 60 Hz (Capable of operation from 75% to 110% of rated line voltage) Physical Height: Width: Overall Depth: Weight: 20. 5" (521 mm) 11. 7" (297 mm) 11. 7" (297 mm) VU Meters Main and Monitor 8 segments: Clip, +5, 0, ­5, ­10, ­15, ­20, ­30 Power Amplifier Section Maximum Power at 1% THD, midband, both channels driven 250 watts per channel into 2 200 watts per channel into 4 125 watts per channel into 8 Continuous Sine Wave Average Output Power, both channels driven (rated power) 180 watts per channel into 4 from 40 Hz to 20 kHz, with no more than 0. 15% THD 110 watts per channel into 8 from 40 Hz to 20 kHz, with no more than 0. 10% THD Power Bandwidth < 10 Hz to 30 kHz (+0, ­1 dB) @ rated power into 4 Frequency Response < 10 Hz to 30 kHz (+0, ­1 dB) < 10 Hz to 55 kHz (+0, ­3 dB) Distortion THD, SMPTE IMD: Signal-to-Noise Ratio > 105 dB below rated power into 8 Channel Separation > 75 dB @ 1 kHz < 0. 10% @ 8 < 0. 15% @ 4 11. 7 inches (297 mm) 20. 5 inches (521 mm) 13. 0 inches (330 mm) 32 pounds (14. 5 kg) 13. 0" (330 mm) 3 OF 6 PAGES PPM 406M U Powered Mixer 4 U 1 MON O O U 2 MON O O U 3 MON O O U 5 MON O O U 6 MON MON +15 O O CUSTOM 32-BIT PRECISION DIGITAL STEREO EFFECTS PROCESSING POWER MASTER OUTPUT SECTION 63 125 250 500 1K 2K 4K 8K 16K 15+ 10 5 0 5 10 15O O O O O O +15 +15 +15 +15 +15 U NORMAL U U U U U U LEVEL CLIP 5 +10 EFX O O EFX O O EFX O O EFX O O EFX O O EFX O O +15 EFX CLIP 10 EFX BYPASS +10 U +10 U +10 U +10 U +10 U +10 U 0 12 EFX DRIVE LEVEL HI 12kHz 5 0 5 10 -15 EFX TO MON U 0 5 10 15 20 HI 12kHz -15 +15 U -15 +15 U HI 12kHz -15 +15 U HI 12kHz -15 +15 U HI 12kHz -15 +15 U HI 12kHz -15 +15 U EFX WIDE MID 2. 5kHz -12 +12 -12 +12 MID 2. 5kHz -12 +12 MID 2. 5kHz -12 +12 MID 2. 5kHz -12 +12 MID 2. 5kHz -12 +12 U MID 2. 5kHz U U U U U REVERSE GATED CATHEDRAL LG. ROOM DELAY 1 DELAY 2 DELAY 3 DELAY 4 CHORUS FLANGE PHASER SPRING +12dB 30 MONITOR EQUALIZER 75Hz RUMBLE REDUCTION MONITOR MASTER LOW 80Hz -15 +15 INPUT LEVEL SET LOW 80Hz -15 +15 INPUT LEVEL SET LOW 80Hz -15 +15 INPUT LEVEL SET LOW 80Hz -15 +15 INPUT LEVEL SET LOW 80Hz -15 +15 INPUT LEVEL SET LOW 80Hz -15 +15 INPUT LEVEL SET PARAMETERS NORMAL NORMAL 63 +15 10 5 0 5 10 -15 125 250 500 1K 2K 4K 8K 16K 15+ 10 5 0 5 10 15O O O O U LEVEL CLIP 5 +10 NORMAL NORMAL NORMAL NORMAL NORMAL NORMAL EFX TO MAIN U 0 5 10 15 20 0 LOW HI LOW HI LOW HI LOW HI LOW HI 10 0 REVERBS DELAYS CHORUS FLANGE PHASER 10 TIME LOW HI DAMPING DEPTH U U U U U U RATE +12dB 30 MAIN EQUALIZER O O +20dB O O VOLUME CH. 1 +20dB O O VOLUME CH. 2 +20dB O O VOLUME CH. 3 +20dB O O VOLUME CH. 4 +20dB O O VOLUME CH. 5 +20dB MAIN MASTER VOLUME CH. 6 PHANTOM POWER CH 1-6 BREAK (MUTES CH 1-6) 75Hz RUMBLE REDUCTION INSERT INSERT INSERT INSERT INSERT INSERT POWER AMP ROUTING AMP 1 AMP 2 MAIN MAIN MAIN MONITOR 406M MAINS POWER AMP 1 IN POWER AMP 2 IN 2 X 250 WATTS LINE LINE LINE LINE LINE LINE EFFECTS EFX FOOT SWITCH SEND MONITOR LINE OUT MONO TAPE IN U MIC 1 MIC 2 MIC 3 MIC 4 MIC 5 MIC 6 O O L +15 R RETURN MIXER LINE OUT COMPRESSOR OUT IN LEVEL L R MONO TAPE OUT 120 VAC 60HZ 320W ON CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT AVIS: RISCQUE DE CHOC ÉLECTRIQUE -- NE PAS OUVRIR 406M 2 X 250 WATTS SERIAL NUMBER EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. REFER SERVICING TO QUALIFIED PERSONNEL. MANUFACTURING DATE POWER REPLACE WITH THE SAME TYPE FUSE AND RATING. DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE UTILISE UN FUSIBLE DE RECHANGE DE MÊME TYPE. DEBRANCHER AVANT DE REMPLACER LE FUSIBLE WARNING !IN A DOMESTIC ENVIRONMENT THIS PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIRED TO TAKE ADEQUATE MEASURES CONCEIVED, DESIGNED, AND MANUFACTURED BY MACKIE DESIGNS INC · WOODINVILLE · WA · USA · MADE IN USA · FABRIQUE AU USA · COPYRIGHT ©1998 · THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF MACKIE DESIGNS INC. : "MACKIE", "FR SERIES", AND THE "RUNNING MAN" FIGURE · PATENT PENDING POWER AMP 1 / MAIN SPEAKER OUT POWER AMP 2 / MONITOR SPEAKER OUT CAUTION- HOT SURFACE, AVOID CONTACT OUTPUT POWER: 250 WATTS / CHANNEL MINIMUM SPEAKER LOAD: 2 OHMS / CHANNEL 4 OF 6 PAGES PPM 406M 5 MAIN MON EFX MAIN' +VDC +/- 15dB LO MID HI TRIM (MUTES CH 1-6, EFX, AND MONITOR) 10 5 0 PHANTOM +VDC TAPE OUT L 9-BAND EQ 3-BAND EQ Off to +20dB -15 -30 -40 -5 -10 (INPUT LEVEL SET) 0 to 40dB BREAK MIXER LINE OUT INSERT POWER AMP 1 IN OF 6 PAGES 80 2K5 12K -20dB VOLUME EFX Off to +10dB 75Hz HPF 63 125 250 500 1K 2K 4K 8K 16K +/- 15dB MIC/LINE CH 1-6 RUMBLE FILTER TAPE OUT R MONITOR MAIN MASTER LEVEL Off to +12dB PWR AMP GROUND CHASSIS GROUND Off to +20dB MAINS AMP ROUTING 10 5 0 -5 -10 MONITOR LINE OUT MAIN/MONITOR POWER AMP 2 IN -15 -30 -40 9-BAND EQ +/- 15dB 75Hz HPF 63 125 250 500 1K 2K 4K 8K 16K RUMBLE FILTER Off to +12dB MONITOR LEVEL PWR AMP GROUND CHASSIS GROUND L Powered Mixer TAPE IN Off to +10dB EFX SEND EFX CLIP TAPE IN LEVEL R LEFT AMP POWER AMP 1/MAIN SPEAKER OUT COMPRESSOR EFX RET L EFX TO MAIN Off to +10dB Off to +12dB EFX LEVEL TIME/RATE EMAC DSP EFX RETURN EFX RET R DAMPING/DEPTH +15V DC PHANTOM EFX WIDE RIGHT AMP EFX FOOT SWITCH EFX TO MONITOR Off to +10dB POWER AMP 2/MONITOR SPEAKER OUT COMPRESSOR MACKIE DESIGNS PPM MONO BLOCK DIAGRAM (#21202CJM/DF/SE) EFX BYPASS MIXER PPM 406M (continued from page 1) Powered Mixer The EMACTM 32-bit digital effects processor was custom designed by our digital engineers and rivals the sound of many high-quality outboard processors. The EMAC Digital Effects section includes an EFX DRIVE LEVEL control, which regulates the signal level being sent to the EMAC effects processor from the individual channels' EFX sends. The overall level is monitored by the CLIP LED to prevent overload. [. . . ] ©1999­2004 LOUD Technologies Inc. Mackie and the "Running Man" figure are registered trademarks of LOUD Technologies Inc. www. mackie. com 16220 Wood-Red Road NE, Woodinville, WA 98072 USA 800. 898. 3211, fax 425. 487. 4337, sales@mackie. com UK +44. 1268. 570. 808, fax +44. 1268. 570. 809, uk@mackie. com Part No. [. . . ]