User manual MAGELLAN 750 NAV INSTALL

[. . . ] · Page 14 Installation Manual - The 750NAV is now being shipped with all maps unlocked. Selecting a Temporary Map is no longer necessary. · Page 19 - The Points of Interest menu has one additional selection. The user may now choose the Search option. [. . . ] This will enable users to bypass traffic jams, construction zones, toll roads and other paths that can make a trip longer than necessary. To exclude a maneuver from the route press the VIEW button while in route guidance mode. A maneuver list will generate. To exclude a maneuver from the route, highlight the maneuver and press ENTER. The system will display the maneuver the user would like to remove, press ENTER to exclude the maneuver. The system will calculate a new route. If it is possible to route around the selected maneuver the 750NAV will display a new route excluding the maneuver. Important note: If the system recalculates the route after using the route exclude feature, the route will revert back to the original route. 5 Off-Road Navigation Great for off-road enthusiasts, the 750NAV'S Off-Road Navigation option allows marking of favorite trails, hunting, and fishing spots. With this option the user can route to points not on roads, set landmarks, create trails, and more. Off-Road is a navigation mode separate from turn by turn navigation and provides the user with the feel of being a separate product. Once Off-Road mode is entered, the unit is functionally transformed into a product, which works just like Magellan's famous hand held GPS receiver. Features Enter navigation points (waypoints) by marking a waypoint by the systems current position, using the systems cursor, or by entering latitude and longitude coordinates. The maximum number of waypoints the system is capable of saving into memory is 100. Create routes by inserting waypoints into a route list. The 750NAV , guides the user from point to point by visually connecting the waypoints with highlighted lines in the order of the route lists. The navigation system then provides directional instruction to the next waypoint in the route. Waypoint to waypoint navigation continues in this fashion progressively through the list of waypoints making up the route. Once the final waypoint in the list is navigated to, the you have arrived voice prompt is heard followed by 3 double chimes. Also a destination screen will be displayed showing the waypoint name and the Lat/Long coordinates of the waypoint. The maximum number of routes the systems can save into memory is 10 with 25 waypoints max. Reverse Route - Calculate a route from the last waypoint in the list to the first waypoint. Next Waypoint - Navigate to the next waypoint in a route list, allows the user to step through a route list or skip the next waypoint while driving a route. The Clinometer Sensor shows how aggressive the terrain is by showing graphics with pitch and roll readings of the vehicles current position. 6 Option Menu Features To access the Off-Road Option menu features, press the OPTION button. Select Configuration from the option list, press ENTER. Select Off-Road Navigation, press ENTER. Track On The tracking feature may be used to "backtrack" the vehicle's route. The "Breadcrumb Trail" left on the map display will be in the form of a blue dashed line. Leaving the user a route to follow back to the point of origin. The blue track will remain on the map display until cleared from the systems memory. [. . . ] Highlight the Lat/Long coordinates and press ENTER. Using the arrow buttons highlight the value you would like to change then use the + - keys to adjust the values to the desired coordinates. 13 After the desired Lat/Long coordinates are entered, scroll to save and press ENTER. Waypoints may also be entered by using the Mark By Cursor feature. While viewing the map, use the arrow keys to pan the map display for the desired location and press ENTER. Mark By Cursor will appear on the display then press ENTER. Press ENTER again to save the waypoint. Or make any desired changes to the name, icon, or description box before saving. 14 Deleting Waypoints To delete a waypoint from the waypoint list. Press ENTER on Select Route/Waypoint. Press ENTER on Waypoints By Name, Waypoints By Distance, or Waypoints By Time. Select the waypoint and Press ENTER. Select Delete and press ENTER. 15 Select Yes and press ENTER. Edit Waypoints To Edit a waypoint from the waypoint list. [. . . ]