User manual MAGELLAN BLAZER 12

[. . . ] GPS lazer12 User Manual WARNINGS A measure of knowledge by the user is required for proper and safe use of the Magellan GPS Blazer12TM. READ THE USER GUIDE & WARRANTY COMPLETELY. Use Good Judgment This product is an excellent navigation aid, but it does not replace the need for careful orientation and good judgment. Never rely solely on one device for navigating. [. . . ] If you accidently pressed the ARROW pad but you meant to end the route, you can still end the route by continuing to press the ARROW pad until END ROUTE is displayed again. A route may contain no more than ten legs and the GPS Blazer12 automatically saves the route and returns to the Route Menu as soon as Leg 10 is entered. After the route has been created, the GPS Blazer12 automatically activates the route and begins providing navigation information for the route. Viewing a Route You can view a summary of the route in memory as well as viewing the individual legs of the route. All editing commands are accessed from the View Route function as well. With a route in memory, press at the top of the display. Press MENU ENTER until ROUTE appears . 19 The first screen displayed is the ROUTE SUMMARY screen. This screen displays the start and end landmark for the entire route as well as the total distance of the route. Use the LEFT/RIGHT ARROWs to view the legs in the route. The leg screen displays the FROM and TO landmark for the leg as well as the distance and bearing for the leg. The circle graphically displays the bearing for the leg. Continue pressing the LEFT/RIGHT ARROWs to step through the other legs in the route, eventually returning to the ROUTE SUMMARY screen. Activating/Deactivating a Route With a route in memory, press MENU until ROUTE appears at the top of the display. If the route is currently active, the display indicates: ENT TO DEACTVATE. If the route is currently deactivated, the display indicates: ENT TO ACTIVATE. Pressing ENTER will activate or deactivate the route depending upon its present status. After a route is deactivated, the route summary is displayed. If a route is activated, the NAV screen is displayed. 20 Deleting a Route With a route in memory, press at the top of the display. While still viewing MENU the Route Summary screen, press the UP ARROW three times until the display indicates PRESS ENT TO DELETE. You will be prompted to confirm the deletion. Use the ARROWs to select YES or NO and press ENTER . Adding Legs to a Route With a route in memory, press at the top of the display. Press MENU ENTER until ROUTE appears . While still viewing the Route Summary screen, press the UP ARROW until the display indicates PRESS ENT TO ADDLEG. The display changes to the Add Leg screen with END ROUTE flashing. As in creating a route, use the ARROW pad to select the new landmark for this leg. [. . . ] The compass direction from your position to a destination, measured to the nearest degree. A unique numeric or alphanumeric description of position. Refers to the theoretical mathematical model of the earth's sea level surface. Map makers may use a different model from which to chart their maps, so position coordinates will differ from one datum to another. [. . . ]