User manual MAGELLAN CROSSOVERGPS

[. . . ] Magellan® CrossoverGPSTM Reference Manual Instructions for Operating the Magellan CrossoverGPS IMPORTANT SAFETY WARNINGS The Magellan CrossoverGPS is a vehicle-navigation aid designed to assist you in arriving at your selected destinations. When using the Magellan CrossoverGPS, these safety rules must be followed to prevent accidents that can result in injury or death to yourself or others: · Some countries prohibit mounting any item to your windscreen. Please check the applicable regulations in your country as regards windscreen mounting. Go to www. magellanGPS. com for alternate mounting solutions. [. . . ] If the unit is on or after you turn it on, a message will be displayed indicating that maps have been found on the SD card. 4. Marine Navigation 26 Changing Regions 1. Accesses the Marine Navigation application. (From the Map screen, tap the MENU button. ) NOTE: If you have an active trip or goto you will need to cancel it before being able to select a region from the SD card. Tap the Right Arrow in the bottom right-hand corner to access page 2 of the menu. 5. Special Terminology Waypoints A waypoint is similar to an address. An address uses the street name and number, the city, and the state to define its location, whereas a waypoint uses imaginary lines drawn on the globe (latitude and longitude) to pinpoint its location. They function in the same way, but are defined differently. Track Track is a record of your travels. As you move across the water the Magellan CrossoverGPS drops and records electronic breadcrumbs that represent your movement. When you look at the map screen you will notice a dotted line showing you a history of how you travelled. Track is primarily used to create a backtrack trip that returns you to your starting point. Backtrack As explained above, the Magellan CrossoverGPS records your track while you are moving. You can then create a trip (called backtrack) that follows this track back to where you started. Goto A goto is a trip that tries to go in a straight line from your present position to a waypoint or a point you have selected on the map. Trip A trip is a route with a single destination or with multiple legs and destinations. Suppose you want to leave the port and go to the bait boat. After getting your bait you want to travel to the fishing hotspot you saved from your last trip. This would be a trip with two destinations (or two legs). You would use the Magellan CrossoverGPS to create a trip that goes from your port waypoint, to the bait boat waypoint, and finally to the hotspot waypoint. 27 Marine Navigation Map Screen Overview 1 2 3 4 5 6 Information Bar Displays information for the cursor position while panning around the map. When selected, zooms out the map display. [. . . ] Select Best Fit to adjust the zoom to fit within the display boundaries; select Actual Size to display the image at 100%; select 25% to 150% to reduce or enlarge the image to the preset level. Slideshow Press the Slideshow button to browse through all the photos in the Pictures folder automatically. Pan If you enlarge an image beyond the screen boundaries, press the Pan button to enable image scrolling. While enabled, you can drag the image in any direction to view other areas of the image. [. . . ]