User manual MAGELLAN EXPLORIST XL

[. . . ] Magellan® eXploristTM XL Reference Manual ***WARNINGS*** IN THE INTEREST OF SAFETY, DO NOT USE THIS NAVIGATION DEVICE WHILE DRIVING A VEHICLE. Please do not try and change any settings on the Magellan eXplorist while driving. Come to a complete stop or have a passenger make any changes. Taking your eyes off the road is dangerous and can result in an accident in which you or others could be injured. USE GOOD JUDGEMENT This product is an excellent navigation aid, but does not replace the need for careful orienteering and good judgement. Never rely solely on one device for navigating. USE CARE The Global Positioning System (GPS) is operated by the U. S. [. . . ] Press ENTER. Activating/Deactivating a Route An active route is the route you are presently navigating on. Anytime you activate a route, it will remain the active route until you either turn it off (deactivate) or activate a new route. GOTO's are automatically activated when they are created while multi-leg routes need to be activated manually. Use the Arrow joystick to highlight Routes. Locate the file that contains the route you want to activate or deactivate. (The eXplorist will automatically open the default file. ) With the file highlighted press ENTER. Highlight Activate Route or Deactivate Route. List of routes with route named `Magellan' active. You will be returned to the last viewed navigation screen with the route chosen activated or deactivated. Routes Changing the Destination Leg of an Active Route 43 When a route is created it can have many different legs to the route, each leg with its own destination. If during your travels you wanted to skip some of the legs you can select the leg that you want to proceed to next. An example would be your planned route starts at your campsite. The second leg goes across the bridge to the stone marker. Leg 3 leaves the stone marker and takes you to the ranger station. To finish out the route, the final leg goes from the ranger station to the swimming area. This route would be Camp > Bridge > Marker > Ranger > Swim. Suppose that after crossing the bridge you didn't want to go to the stone marker but instead go directly to the ranger station. Since the route is active (you can only select legs from active routes), you would follow the instructions below and tell the eXplorist to set the next leg to the ranger station. The route would be recomputed, eliminating the navigation instructions to go to the stone marker. Use the Arrow joystick to highlight Routes. Locate the file that contains the active route. (The eXplorist will automatically open the default file. ) With the file highlighted press ENTER. (Activated routes will be bolded in the list. ) Press ENTER. Use the Arrow joystick to highlight the next destination POI from the route list that you want to go to. [. . . ] Use the Arrow joystick to highlight Clock. Use the Arrow joystick to highlight the Daylight Savings field. Use the Arrow joystick to highlight the Region field. Select United States, European Union, Custom, or Disable. [. . . ]