User manual MAGELLAN EXPLORIST 600

[. . . ] Magellan eXplorist 600 Reference Manual Topics: · · · · · · · · · · · · · · · · · eXplorist 600 GPS Receiver Using the eXplorist 600 Starting Up Navigation Screens File Structure Points of Interest Routes Track Logs Weather Electronic Compass Advanced Features Magellan Geocache Manager Using MapSend Preferences Specifications Accessories Contacting Magellan Support *** Warnings *** IN THE INTEREST OF SAFETY, DO NOT USE THIS NAVIGATION DEVICE WHILE DRIVING A VEHICLE. Please do not try to change any settings on the Magellan® eXploristTM while driving. Come to a complete stop or have a passenger make any changes. Taking your eyes off the road is dangerous and can result in an accident in which you or others could be injured. USE GOOD JUDGMENT This product is an excellent navigation aid, but it does not replace the need for careful orienteering and good judgment. Never rely solely on one device for navigating. USE CARE The Global Positioning System (GPS) is operated by the U. S. [. . . ] The route would be recomputed, eliminating the navigation instructions to go to the stone marker. Use the Arrow joystick to highlight Routes. Press ENTER. Locate the file that contains the route you want to activate or deactivate. eXplorist will automatically open the default file. ) With the file highlighted press ENTER. (Activated routes will be bolded in the list. ) Press ENTER. Use the Arrow joystick to highlight the next destination POI from the route list that you want to go to. In the example to Route leg list with Ranger the right, that would be Ranger. Confirm that you want to do this by using the Arrow joystick to highlight Yes. Press NAV to return to the last viewed navigation screen. Marker is bold because it is the current active leg. Routes Editing a Saved Route 52 Saved routes can be edited to add a new leg at the end of the route (Add POI), remove a leg (Delete POI), insert a new leg (Insert POI), or change the destination from one POI to another (Replace POI). Use the Arrow joystick to highlight Routes. Locate the file that contains the route you want to edit. automatically open the default file. ) With the file highlighted press ENTER. Adding a Leg: Use the Arrow joystick to highlight Add POI. Search the POI database for the new POI. The new POI will be added to the end of the route. Inserting: Use the Arrow joystick to highlight the POI that you want to a new leg inserted in front of. Press MENU, highlight Insert POI and press ENTER. Search the POI database for the new POI. The new POI will be added inserting into the route you are creating. Deleting: Use the Arrow joystick to highlight the POI you want to delete from the route. Press MENU, highlight Delete POI, and press ENTER. Replacing: Use the Arrow joystick to highlight the POI you want to replace. [. . . ] When all of the information has been entered and is correct, press ESC to return to the Clock screen. Specifications Performance Receiver Antenna 112 14 parallel-channel technology, tracks up to 14 satellites to compute and update information. Patch Warm Cold Update Rate less than 1 minute less than 2 minutes 1 second continuous <7 meters, 95% 2D RMS w/WAAS/EGNOS <3 meters, 95% 2D RMS Velocity 0. 1 knot RMS steady-state 951 MPH (1530. 5 km/h) 60, 000 ft. (18, 600 meters) Acquisition Times (optimal conditions) Accuracy Position Limits Speed Altitude Physical Size Weight Display 4. 6" x 2. 1" x 1. 3" [h] x [w] x [d] 11. 7 cm x 5. 3 cm x 3. 3 cm 4 ounces (110 grams) with battery installed 1. 8" x 1. 4" [h] x [w] 4. 6 cm x 3. 6 cm color, high-contrast LCD with backlit display Housing Temp. Range Weatherproof construction, wraparound rubber armor Operating: 14°F to 140°F (-10°C to 60°C) Power Source Battery Life 1 rechargeable LI-ION battery. [. . . ]