User manual MAGELLAN EXPLORIST 710

[. . . ] Revisions Initial Release A 10/15/2010 Initial release with basic functions Safety Warnings The Magellan eXplorist is a navigation aid designed to assist you in arriving at your selected destination. When using the Magellan eXplorist, these safety rules must be followed to prevent accidents that can result in injury or death to yourself or others: IN THE INTERESTS OF SAFETY, DO NOT USE THIS NAVIGATION DEVICE WHILE DRIVING A VEHICLE. Please do not try to change any settings on the Magellan eXplorist while driving. Come to a complete stop or ask a passenger make any changes. Taking your eyes off the road is dangerous and can result in an accident in which you or others could be injured. USE GOOD JUDGEMENT This product is an excellent navigation aid, but does not replace the need for careful orienteering and good judgement. [. . . ] Just tap on the desired profile button and all of the profile settings are changed to the profile selected. Note: A routable map is required for the vehicle profile option. The Dashboard Screen displays a small compass and up to eight customizable data fields. The data fields displayed are customizable (see Customizing the Data Fields). Customizing Data Fields Setting the Number of Fields Displayed 1. Access the Dashboard screen you want to change the number of displayed fields. Data Only Screen 2. (Not available on the Satellite Status screen. ) 4. The current number of fields being displayed is shown with an arrow above and below it. 5. Tap the up arrow to increase the number of displayed fields. (Note: it stops increasing when it gets to the maximum number of fields available for the viewed dashboard screen. ) of displayed fields. (Note: the number of displayed fields can be set to 0 except for the Data Only screen which has a minimum of 1. ) Fields. 6. Tap the down arrow to decrease the number The Data Only Screen displays the most number of data fields available to be viewed at one time in the receiver. Up to 14 customizable data fields can be viewed at one time. The data fields displayed are customizable (see Customizing the Data Fields). 7. Tap on the Dashboard screen to exit Edit # of Changing Displayed Data Profile Screen 1. Access the Dashboard screen you want to change the data displayed. Tap on any of the displayed data fields to 3. Select the type of data to be displayed from the 4. The Dashboard screen is displayed with the data selected displayed. Profiles can be used to store settings you choose that are "assigned" to a particular type of navigation. For example, you might want distance displayed when Magellan eXplorist 510 / 610 / 710 User Manual 13 OneTouch® Menu The OneTouch Menu gives quick and easy access to destinations, functions and searches that you can assign to the menu. Assign a destination so you can quickly set a route to it, or assign a function that you use often and access it with one touch of the screen, or assign a waypoint, geocache or POI search that is always ready at your fingertips. Basics of the OneTouch Menu Accessing the OneTouch Menu Assigning a Commonly Used Function 1. Tap on any available "Assign" button. The shortcut is saved and the OneTouch Menu is displayed. 1. Tap the Map screen to bring up the Four Corner Menu screen. 2. [. . . ] Tap the Altimeter drop-down menu and select the desired source. 1. Tap the Primary Coordinate Datum drop-down menu and select the desired datum. Memory This setting is used to view memory usage and provides access to memory tools. Use SD Card for External Storage Setting Secondary Coordinate System 1. Tap on the Use SD Card button to use the SD card for storage. (When checked, the SD card will be used for external storage. ) 1. [. . . ]