User manual MAGELLAN GPS 320 FAQ

[. . . ] How many waypoints I can save in myGPS 315/320?How can I create a GOTO route in my GPS 315/320? A GOTO is a route that guides you from your current position to any waypoint in the receiver's memory. Use the NAV key to view all the screens. [. . . ] How do I create a GOTO route on the plotter screen? A GOTO route can be created by selecting a waypoint on the plotter screen. From the plot screen press the MENU button>Select PAN-NSCAN and press enter>Move the crosshair using the arrow keys>Press GOTO>Use Up/Down to select Yes or No and press ENTER Reset the unit by clearing the memory. Then leave it outdoors for a one-half hour to acquire satellite feed How do I clear memory in my GPS 315/320?How do I create a multi-leg route in my GPS 315/320? Press the MENU button > Select Routes and press enter>Use Up/Down to select empty route and press enter>Highlight the first dotted line to place the first waypoint in the multi-leg route and press enter>Use Up/Down arrows to select category and press enter>Use Up/Down to select waypoint and press enter. Continue this process until you have completed the route. Press MENU from any screen>Language and press enter >Use Left/Right arrows to select language and press ENTER. Press the MENU button >Select SETUP and press enter>Select COORD SYSTEMS and press ENTER> Use Up/Down arrow keys to select system and press enter>Use Up/Down arrow to choose format and press ENTER. Press the MENU button >Select SETUP and press enter>Select MAP DATUM and press ENTER> Use Up/Down arrow keys to select primary or secondary and press enter>Use Up/Down arrow to choose DATUM and press ENTER. press the MENU button >Select SETUP and press enter>Select ELEV MODE and press ENTER> Use Up/Down arrow keys to select 3D and press ENTER. Press the MENU button >Select SETUP and press enter>Select TIME FORMAT and press ENTER> Use Up/Down arrow keys to select value and use arrow key to INPUT TIME and press ENTER. How do I change language in my GPS 315/320?How to select map datum in my GPS 315/320?How do I change the elevation mode from 2D to 3D?How do I change the navigation units from kilometers per hour to miles per hour?How do I change north reference from true to magnetic?What is the default baud rate in my GPS 315/320 and how do I change the baud rate?What can I do if the receiver will not turn on?Can I use rechargable batteries in my receiver?Replace with two new AA alkaline or lithium batteries. However, the battery life of your receiver will be diminished as well as the possibility of an incorrect reading on the battery life gauge with the use of rechargeable batteries. [. . . ] Reduces the speed at which the unit starts position averaging to 0. Fixes problems with display of XTE values on the large navigation information screen 4. Fixes the trip odometer not to be reset by a power off/on cycle. The trip odometer resets only when averaging is set or when you explicitly reset it. [. . . ]