User manual MAGELLAN NAV 1200 XL

[. . . ] Press the AUX soft key to access the auxiliary menu screen. While "General Setup" is highlighted in the auxiliary window, press enter to access the window at right, containing the contrast option. Use the cursor key to highlight contrast and press enter. Use the right/left arrows on the cursor key to adjust the contrast to a comfortable level, and then press enter to confirm. [. . . ] From any NAV screen, press routes, list softkey. Use the cursor key to highlight the route in which you wish to delete a waypoint and press enter. To edit the active route a shortcut is to press routes, edit. Use the cursor key to place the cursor over the waypoint in the route that you wish to remove. The waypoint is removed from the route, however it continues to exist as a waypoint in the waypoint list and on the map. 9 Question: Answer: 10 Question: Answer: 11 Question: Answer: 12 Question: Answer: 13 Question: Answer: 14 Question: Answer: 15 Question: Answer: 16 Question: Answer: 5. How do I change the time format from 24 hours to 12 hours in my NAV6500/NAV6510?Press the aux softkey, highlight general setup using the cursor key, and press enter. Highlight time format and press enter to display a window with the options 24, 12. Use the cursor key to select 12 hours and press enter. What is the default time format in my NAV6500/NAV6510?List all the languages supported by my NAV6500/NAV6510?Use the cursor key to select kilometers and press enter. 26 Question: How do I change depth units from feet to fathoms?Press the aux softkey, use the cursor key to highlight CDI/units/alarms and press enter. Use the cursor key to highlight depth units and press enter. Use the cursor key to select fathoms and press enter. Press esc to exit. Answer: 27 Question: How do I clear the track in my NAV6500/NAV6510?Press the aux softkey, use the cursor key to highlight track history and press enter. Use the cursor key to highlight clear track memory and press enter. Use the cursor key to select yes or no and press enter. What is the difference between total memory reset and GPS memory reset?Total memory reset is used only if you wish to erase the last completed position, time, date, and all user-entered information, including all waypoints, routes, track, and setup. [. . . ] Reconnect power and turn the power back on. Position coordinates on my GPS receiver do not match the location on the map?Make sure that your receiver is set up to use the same datum as your map. Why doesn't my GPS receiver recognize the C map-card? [. . . ]