User manual MAGELLAN NAV 5000DLX

[. . . ] Purchaser is advised to perform careful position charting and use good judgement. Read the User Guide carefully before using this product. MAGELLAN SYSTEMS CORPORATION WARRANTY Magellan Systems Corporation warrants their GPS receiver and accessories to be free of defects in material and workmanship for a period of one year from the date of original purchase. This warranty applies only to the original purchaser of this product. [. . . ] Use the CURSOR KEY to place the cursor at the position where you wish to add a waypoint to the end of the route. The help bar indicates "ENTER to append Quit to exit. " Press ENTER. If a waypoint does not exist at the cursor position, the MARK CURSOR POSITION window appears. Press ENTER and use the CURSOR KEY to modify the name, type and description if desired. When you have finished, 40 Magellan NAV 5000DLX press the DONE softkey. The waypoint you created or selected at the cursor position has been added to the end of the route. Appending a Waypoint to the End of a Route Manually ROUTES MANUAL LIST Highlight route ENTER Select a waypoint from the list (using the NEARST or FIND function if desired) and press ENTER. If the list is very long, you may access the Find Waypoint function in this list by pressing the FIND softkey. You may also list the waypoints in order of proximity to the present position by pressing NEARST. Moving a Waypoint in a Route ROUTES LIST Highlight route ENTER Move cursor to the last ENTER position in the route Highlight waypoint ENTER DONE From any root screen, press the ROUTES, LIST softkeys. Use the CURSOR KEY to highlight the route in which you wish to append a waypoint to the end and press ENTER, MANUAL. To edit the active route a shortcut is to press ROUTES, EDIT, MANUAL. Use the CURSOR KEY to place the highlight at the end of the route list. The route is deleted. ROUTES DELETE Confirm Delete Copying a Route While viewing a route on the Map screen, press the ROUTES, DELETE softkeys. YES NO" Highlight YES and press ENTER. The route you were viewing is deleted (The waypoints, however, remain in memory). ROUTES LIST Highlight route COPY From any root screen, press the ROUTES, LIST softkeys. Use the CURSOR KEY to highlight the route you wish to copy and press COPY. A window appears briefly: "Route # x was copied to route # y" and the display returns to the route list. The highlighted route is copied to the first available route. If there are already 25 existing routes, the Copy function is not available. You must first clear a route before copying. Magellan NAV 5000DLX 43 Creating a Backtrack Route When Track History is on, the unit drops "bread crumbs" at every travelled interval as set under Track History. Activation of backtrack automatically creates a route that starts from the last point recorded to the first point in track history memory. By following this route, you "retrace your steps" back to the starting position. Using all the track history points in memory, the unit calculates a route consisting of legs at least 0. 2 nm in length. [. . . ] This random error, known as Selective Availability (SA) is not due to receiver error and is not significant enough to affect navigation for most purposes (See DGPS in appendix). Measures the probable accuracy of a position fix, based on the position of the satellites relative to each other. A single leg route with the present position being the start of the route and a defined waypoint as the destination. 93 EPE Coordinates Course CTS Geometric Quality GOTO Magellan NAV 5000DLX Heading The direction in which the NAV 5000DLX is moving, track or ground course, (due to wind, current, and so forth), and may also be different from the course. The angular distance north or south of the equator measured by lines encircling the earth parallel to the equator in degrees from 0° to 90°. [. . . ]