User manual MAGELLAN NAV DLX10

[. . . ] What is the function of the map/CTR key on my Nav 6000?The map CTR key is used to display the map screen from any screen and centers the map on the last computed position. What is the function of the help bar on my Nav 6000?The map screen and many of the function screens contain a help bar, located directly above the NAV window, which tells you the action or actions you may perform on the current screen. [. . . ] Use the cursor key to move the cursor close to the course line near the point you wish to insert a waypoint in the route. Press the insert softkey, then use the cursor key to move to the exact position you want to insert an existing or to-be-created waypoint. If a waypoint does not already exist at that point, the mark cursor position window appears. Press enter and use the cursor key to modify the name, type and description if desired. When you have finished, press the done softkey. The inserted waypoint appears at the position you placed it on the map. How do I insert a waypoint in a route manually on my Nav 6000?From any root screen, press routes, list softkeys. Use the cursor key to highlight the route in which you wish to insert a waypoint and press enter. Press manual and the routes screen appears with the first waypoint in the route highlighted. Use the cursor key to highlight the waypoint in the route before you wish to insert a waypoint and press insert. If the waypoint being moved is in the middle or at the end of a route, the bearing and distance shown is from the previous waypoint to the cursor position. The waypoint is moved from the old position to the new position. Waypoints are movable, whether or not they are contained in an active route. How do I replace a waypoint in a route manually on my Nav Answer: 43 Question: Answer: 44 Question: Answer: 45 Question: Answer: 6000?From any root screen, press the routes, list and use the cursor key to select the route in which you wish to replace a waypoint. Use the cursor key to highlight the waypoint you wish to replace and press enter. Select the waypoint you wish to use to replace the one you highlighted and press enter. The waypoint you select in the waypoint list replaces the one you highlighted in the route. How do I activate a leg of a route on my Nav 6000?From any root screen, press the routes, list and use the cursor key to select the route in which you wish to activate a leg. Press enter, manual then use the cursor key to highlight the destination waypoint of the leg you wish to activate in the route. [. . . ] Press the menu softkey, use the cursor key to highlight track history and press enter. Use the cursor key to highlight clear track memory, and press enter. Use the cursor key to select yes or no and press enter. How do I calculate sunrise/sunset lunar information in my Nav 6000? [. . . ]