User manual MAGELLAN PIONEER

[. . . ] GPS Pioneer MAGELLAN User Manual WARNINGS A measure of knowledge by the user is required for proper and safe use of the Magellan GPS PioneerTM. READ THE USER GUIDE & WARRANTY COMPLETELY. Use Good Judgment This product is an excellent navigation aid, but it does not replace the need for careful orientation and good judgment. Never rely solely on one device for navigating. [. . . ] When the desired landmark is displayed (and flashing) press ENTER . Note that as you scroll through the list of landmarks, the display updates showing you the bearing and distance from the start of this leg to the displayed landmark. If the distance from the start of the leg to the end of the leg is below 0. 10 miles, the message INVALID is displayed and you are prompted to select a different landmark. The screen changes to the next leg in the route with the destination landmark of the previous leg inserted as the start of the next leg. The message END ROUTE is displayed in the TO field. You may continue this route by using the ARROW 18 pad to select a landmark as the destination for this leg or press ENTER to signal the GPS Pioneer that this was the last leg in the route and you are finished creating a route. Continue this process for each leg in the route remembering to press ENTER with END ROUTE displayed in the TO field to finish up the route. If you accidently pressed the ARROW pad but you meant to end the route, you can still end the route by continuing to press the ARROW pad until END ROUTE is displayed again. A route may contain no more then ten legs and the GPS Pioneer automatically saves the route and returns to the Route Menu as soon as Leg 10 is entered. After the route has been created, the GPS Pioneer automatically activates the route and begins providing navigation information for the route. Viewing a Route You can view a summary of the route in memory as well as viewing the individual legs of the route. All editing commands are accessed from the View Route function as well. With a route in memory, press at the top of the display. Press MENU ENTER until ROUTE appears . 19 The first screen displayed is the ROUTE SUMMARY screen. This screen displays the start and end landmark for the entire route as well as the total distance of the route. Use the LEFT/RIGHT ARROWs to view the legs in the route. The leg screen displays the FROM and TO landmark for the leg as well as the distance and bearing for the leg. The circle graphically displays the bearing for the leg. Continue pressing the LEFT/RIGHT ARROWs to step through the other legs in the route, eventually returning to the ROUTE SUMMARY screen. Activating/Deactivating a Route With a route in memory, press MENU until ROUTE appears at the top of the display. If the route is currently active, the display indicates: ENT TO DEACTVATE. If the route is currently deactivated, the display indicates: ENT TO ACTIVATE. Pressing ENTER will activate or deactivate the route depending upon its present status. 20 Deleting a Route With a route in memory, press at the top of the display. While still viewing MENU the Route Summary screen, press the UP ARROW three times until the display indicates PRESS ENT TO DELETE. You will be prompted to confirm the deletion. [. . . ] The compass direction from your position to a destination, measured to the nearest degree. A unique numeric or alphanumeric description of position. Refers to the theoretical mathematical model of the earth's sea level surface. Map makers may use a different model from which to chart their maps, so position coordinates will differ from one datum to another. [. . . ]