User manual MAGELLAN ROADMATE 1200

[. . . ] Magellan® RoadMateTM 1200 User Manual Magellan Navigation, Inc. 960 Overland Court, San Dimas, CA 91773 IMPORTANT SAFETY WARNINGS The Magellan RoadMate is a vehicle-navigation aid designed to assist you in arriving to your selected destinations. When using the Magellan RoadMate, these safety rules must be followed to prevent accidents that can result in injury or death to yourself or others: · California and Minnesota law prohibits mounting any item to your windshield. Please check with your state or local law enforcement for applicable regulations regarding windshield mounting. [. . . ] (Note: The Maneuver List screen is not available until you begin moving on the route. ) Each line in the maneuver list provides details about the maneuver in the order that they are to be made, with the next maneuver at the top. The bottom bar of the Maneuver List indicates the distance and time to the next maneuver as well as the total distance computed for the route. The Maneuver List can be modified if you want to exclude one of the maneuvers should you want to avoid travelling one of the streets listed. Instructions to exclude one of the maneuvers is described in this chapter. Maneuver List The maneuver highlighted indicates that you will be instructed to make a left turn in 0. 3 miles on S. Grand Ave. Accessing the Maneuver List 1. Tap the maneuver icon in the lower left corner of the Map screen. This icon is displayed only while on an active route. Excluding a Maneuver This is used to modify the route to possibly avoid routing on a particular street. Tap on the item in the list with the street you want to try and avoid. (Tap the back arrow to cancel. ) The Magellan RoadMate recalculates the route and displays the Maneuver List with the newly computed maneuvers. GPS Status Screen 1. The GPS Status screen is also accessed from the Map screen and displays the status of the GPS satellites in a graphical format. (More technical information on the GPS status can be found in under the User Options menu: Main Menu Page 2 > User Options > GPS Options > GPS Status. ) Green bars indicate that the Magellan RoadMate is using these satellites to compute the position; orange bars indicate that the Magellan RoadMate is trying to lock on to GPS Status Screen Map Screen 16 the satellite signal; and no bar shown indicates a satellite that is not being tracked. The longer the bars, the better the signal. Accessing the GPS Status Screen 1. From the Map screen, tap the GPS Signal Strength icon in the upper right corner. Tap on the back arrow to return to the Map screen. Zoom Levels There are 23 zoom levels in the Magellan RoadMate, ranging from 100 feet to 1200 miles. Select the zoom level that best suits your needs. Setting Zoom Levels 1. While viewing the Map screen, tap on the (zoom in) or (zoom out). Volume The volume can be adjusted or muted from the Map screen. (The volume can also be adjusted from User Options > System Settings > Volume. ) Changing the Volume from the Map Screen. 1. Tap the speaker icon . Tap on the Mute button to mute the volume or tap inside the volume adjust bar below the Mute button to change the volume levels. Tap . 3. If you have the volume muted the speaker icon is displayed with a line through it indicating it is muted. To unmute, tap the speaker icon again. Map Screen 17 Home Address Your home address can be entered and saved in the Magellan RoadMate for quick and easy access when you need to create a route home. Creating a Home Address These instructions only apply if you have never entered a home address or if it has been deleted. 1. 5. Tap the Home Address icon on the Main Menu screen. Confirm "Do you want to enter your HOME address?" Tap Yes. Follow the prompts to enter the address to be used as your HOME address. [. . . ] Tap Restart to begin the route you are currently simulating back to the beginning. Simulator Mode Screen User Options 48 Tap Stop to end simulating the current route you are simulating. (The Simulate button is presently not active. ) 4. Tap Back arrow to record the changes and exit. Setting Tone Options Provides a way of selecting the tone used to announce arrival at a maneuver or destination. 1. 4. From page 2 of the Main Menu, tap User Options. [. . . ]