User manual MAGIMIX EXPRESSO 11403 AUTOMATIQUE

[. . . ] Each parameter has been calculated with great precision to ensure that all the aromas from each capsule can be extracted, to give the coffee body and create an exceptionally thick and smooth crema.  NOTE: when you see this sign, please note that you can also use the NESPRESSO EXPERT&MILK ❶ ❷  Quick Start Guide Guide de démarrage rapide 2x >40° >40° >40° >40° >40° >40° ❸ ❹ 3x ❻ 1 Water Hardness Test Stick, in the User Manual 1 bâtonnet de test de dureté de l’eau disponible dans le guide d'utilisation App for this function. Cleaning the Aeroccino •• Clean after each preparation. Use detergent and rinse with warm / hot water. [. . . ] For cold milk froth, keep button pressed for approx. + 2X max 1X CAUTION: Use only a non-metal spoon to collect the foam in the jug. CAUTION: Clean before the first use and after each use according to the cleaning instructions. CAUTION: Ensure the jug is cold before removing it from the base. Or, if removing with care, rinse with cold water immediately to cool down the jug and avoid burning risks. 20 Cleaning the Aeroccino /  Nettoyage de l’Aeroccino ❶ Remove the jug from the base, remove seal from lid, remove the whisk, remove the spring from the whisk. Wash inner jug, seal, lid, whisk and spring with detergent and rinse with warm / hot water. >40° EN FR ❷  Do not put the jug in the dishwasher and do not immerse into water for cleaning purposes, do not water the bottom part of the Aeroccino which contains the electrical plug, but clean the interior of the Aeroccino with detergent and rinse with warm/hot water.  Dry all Aeroccino parts with a fresh and clean towel, cloth or paper and reassemble all parts. utilisez des produits de nettoyage non abrasifs. CAUTION: In case base needs to be cleaned unplug it first and use only a damp cloth. > 6 sec ❸ nter settings mode: E - Press brewing button for 6 seconds - both dials will flash to confirm you are in settings mode. - Select Espresso and press brewing button - Espresso icon flashes for confirmation. - To exit this mode without doing a factory reset, push the brewing button. No / Exit: Yes / Confirm: - To factory reset, turn temperature dial up to maximum position and press brewing button. - When the procedure is finished, clean the drip tray and the cup support. - Machine turns to OFF mode automatically when empty. 25 EN FR Cleaning / Nettoyage To ensure hygienic conditions, it is highly recommended to empty and clean the used capsule container every day. par mesure d’hygiène , il est fortement recommandé de vider et de nettoyer quotidiennement le bac à capsules usagées.  Remove lid and water tank and clean them all with odorless detergent and rinse with warm / hot water. Dry all water tank container parts with a fresh and clean towel, cloth or paper and reassemble all parts. D  o not use any strong or abrasive solvent, sponge or cream cleaner. [. . . ] -  lick on “unpair this device” to confirm the unpairing. M -  heck if the water tank is correctly positioned, if empty, fill with potable water. U -  mpty drip tray if full and remove all the water under the machine. -  rew button light ON and maintenance LED slow blinking means descaling B is required. [. . . ]