User manual MAGNAT DVS 4232

[. . . ] the device and the remote control should not be exposed to dripping or splash water or high levels of humidity. No objects filled with liquids, such as vases, shall be places on the unit. in the event of contact with moisture or liquids remove the mains adapter immediately. Only clean the device using a dry cloth. [. . . ] ON/OFF Plug in the power cord to the outlet, switch the MAIN POWER to ON position at the back of the unit, the unit goes into standby mode, the LED displays "HELLO". If there is no signal present, the LED will display "NO SIGNAL" . * Note: After shut off the unit, please wait at least 3 seconds before turn on it again. INPUT MODE The system is not connect the USB or SD memory card: Press INPUT button on the front panel or on the remote control to cycle through the selections: OPTICAL 1 --OPTICAL 2 --COAXIAL 1--COAXIAL 2--AUX--TV--USB/SD/MS/MMC input mode. The system is connect the USB memory card: Press INPUT button on the front panel or on the remote control to cycle through the selections: OPTICAL 1 --OPTICAL 2 --COAXIAL 1--COAXIAL 2--AUX--TV--USB input mode. The system is connect the SD memory card: Press INPUT button on the front panel or on the remote control to cycle through the selections: OPTICAL 1 --OPTICAL 2 --COAXIAL 1--COAXIAL 2--AUX--TV--SD input mode. The system is connect the USB and SD memory card: Press INPUT button on the front panel or on the remote control to cycle through the selections: OPTICAL 1 --OPTICAL 2 --COAXIAL 1--COAXIAL 2--AUX--TV--USB input mode. LISTENING MODE Press LISTEN button on the remote control to cycle through the listening modes:Stereo --Vocal --Pro-Logic. Then press MASTER VOLUME button to control subject volume level up or down. SELECT SUBWOOFER OUTPUT To connect an external active subwoofer, connect the monaural input jack of your subwooer to the SUBWOOFER OUTPUT jack of this unit. The system can connect your TV use video output connector on the rear panel. Use the [ ] [ ] buttons to select one of the SETUP options, highlight your desired selection with in each SETUP menu and press ENTER/PLAY button to confirm. To exit the menu and go to another SETUP menu, use [ ] [ ] button to select EXIT SETUP. When a wide-screen picture is played, the left and right sides of the picture will be deleted and the picture will be seen on the screen. B) 4:3LB (mailbox): please choose this option for a TV with average dimensions. When the widescreen picture is played, you will see black rims on the top and bottom of the TV screen. System Setup DEFAULT: All functions resume initial statuses if you choose this option. Language Setup Select the language here, which is to be used for the screen display of the menus and the status information. Video Setup Here you can regulate the different parameters of the image representation. Please select the desired function, then press ENTER and adapt the value with the [ ] [ ]-keys according to your desire. Downmix a) LT/RT: you can select this option to decrypt the signal so as to present a vivid theater effect, provided that your DISC contains PRO LOGIC Dolby stereo effect. At 2 sound channel output, the audio outputs to left and right speakers. [. . . ] Further claims, and in particular those for price reduction, cancellation of sale, compensation for damages or subsequential damages, are excluded. The guarantee period is not altered by the fact that we have carried out guarantee work. Unauthorized tampering with the equipment will invalidate this guarantee. Consult your authorized dealer first, if guarantee service is needed. [. . . ]