User manual MAKITA 4013D

[. . . ] Charge the battery cartridge with your Makita charger properly before use. Following batteries can be used for this cleaner; Model Battery type 1200, 1220 Capacity (mAh) 1300 2000 2600 3000 1300 2000 2600 3000 Number of cells 10 10 10 10 12 12 12 12 Read this instruction manual and the charger instruction manual carafully before use. do not pick up wet materials , lit cigarettes or the like. [. . . ] If the cartridge does not slide in easily, it is not being inserted correctly. Always be sure that the dust bag or paper filter is installed properly in the cleaner before use. Improper installation may allow dust to enter the motor, resulting in malfunction of the cleaner. â· Always switch off the cleaner after each use to prevent damage to the cleaner and to lengthen the service life of the batteries. CAUTION: Empty the cleaner before it becomes too full, or the suction force weakens. 4) Take the dust bag out of the cleaner carefully so that the contents will not spill out. 5) Also empty out the dust inside the cleaner itself. Always install the set plate when using battery cartridges 1200, 1202 or 1202A. Install the set plate on the cleaner with the screw provided. 8) CAUTION: Forgetting to install the dust bag, failure to insert the holder of the dust bag all the way into the slots or using a broken or ripped bag, may allow dust to get into the motor. Hook the front cover onto the front lip of the cleaner. When installing the paper filter, follow the same procedures for the dust bag. â· Always unfold a new paper filter before installing it on the cleaner. CAUTION: Always be sure that the cleaner is switched off and the battery cartridge is removed before carrying out any work on the cleaner. When storing the cleaner, hang it from a nail using the convenient hanger in back. From time to time wipe off the outside (cleaner body) of the cleaner using a cloth dampened in soapy water. [. . . ] The accessories or attachments should be used only in the proper and intended manner. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in compliance with the following standards or standardized documents, EN50260, EN55014 in accordance with Council Directives, 89/336/EEC and 98/37/EC. The typical A-weighted sound pressure level is 72 dB (A). [. . . ]