Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAKITA 4157KB. We hope that this MAKITA 4157KB user guide will be useful to you.
Lastmanuals help download the user guide MAKITA 4157KB.
Detailed instructions for use are in the User's Guide.
[. . . ] 31 Ohms it can be presumed that there will be no negative effects. The mains socket used for this device must be protected with a fuse or protective circuit breaker having slow tripping characteristics. Safety hints For your own safety, please refer to the enclosed safety instructions. [. . . ] Then remove the hex socket head bolt, outer flange and the diamond wheel. Make sure that the arrow on the wheel should point in the same direction as the arrow on the tool. Check the wheel carefully for cracks or damage before operation. Use only flanges specified for this tool. Damage to these parts could result in wheel breakage. The handy rip fence (guide rule) allows you to do extra-accurate straight cuts. Simply slide the rip fence up snugly against the side of the workpiece and secure it in position with the clamp screw on the front of the base. This adjustment has been made at the factory. But if it is off, adjust the adjusting screw with a screwdriver while squaring the blade with the base using a triangular rule, try square, etc. This tool equipped with a dust box to collect dust and cut chips. When the dust box is about two thirds full, empty its contents. Cleaner cutting operations can be performed by connecting this tool to a Makita vacuum cleaner. For straight cuts, align the right edge of the notch in the front of the base with your cutting line on the workpiece. For 45° bevel cuts, align the left edge of the notch in the front of the base with it. CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the ``OFF'' position when released. To prevent the switch trigger from being accidentally pulled, a lock-off button is provided. Replace carbon brushes when they are worn down to the limit mark. [. . . ] ⷠSince excessive cutting may cause overload of the motor, the depth of cut should not be more than 20 mm at a pass. When you wish to cut more than 20 mm deep, make a couple of passes with progressively deeper settings. CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA 4157KB
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA 4157KB will begin.
MAKITA 4157KB ANNEXE 172 (286 ko)
