User manual MAKITA 6217DWDLE

[. . . ] Cordless Driver Drill Equipped with Electric Brake MODEL 6217D MODEL 6237D MODEL 6317D MODEL 6337D MODEL 6347D INSTRUCTION MANUAL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. w w w. c o m SPECIFICATIONS Model Steel Wood Capacities Wood screw Machine screw No load speed (RPM) High Low 6217D 6237D 6317D 6337D 13 mm (1/2") 25. 4 mm (1") 6 x 75 mm (1/4" x 3") 13 mm (1/2") 32 mm (1-1/4") 6 x 75 mm (1/4" x 3") 13 mm (1/2") 38 mm (1-1/2") 10 x 89 mm (3/8" x 3-1/2") 13 mm (1/2") 6347D 10 mm (3/8") 25. 4 mm (1") 6 x 75 mm (1/4" x 3") 13 mm (1/2") 32 mm (1-1/4") 6 x 75 mm (1/4" x 3") 13 mm (1/2") 0 - 1, 300/min. 233 mm (9-1/8") 1. 9 kg (4. 2 lbs) 0 - 400/min. [. . . ] When the battery cartridge is inserted, the charging light color will change from green to red and charging will begin. Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. Charge the battery cartridge with room temperature at 10°C - 40°C (50°F - 104°F). Let a hot battery cartridge cool down before charging it. Charge the Nickel Metal Hydride battery cartridge when you do not use it for more than six months. 9 001894 Switch action · CAUTION: Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. 1 1. Switch trigger To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. Electric brake This tool is equipped with an electric brake. If the tool consistently fails to quickly stop after switch trigger release, have tool serviced at a Makita service center. 001895 Reversing switch action This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation. 1 2 1. Counterclockwise 3 When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled. CAUTION: Always check the direction of rotation before operation. Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. When not operating the tool, always set the reversing switch lever to the neutral position. · · · 001896 Speed change To change the speed, first switch off the tool and then slide the speed change lever to the "2" side for high speed or "1" side for low speed. Be sure that the speed change lever is set to the correct position before operation. CAUTION: Always set the speed change lever fully to the correct position. If you operate the tool with the speed change lever positioned halfway between the "1" side and "2" side, the tool may be damaged. 1 1. Speed change lever · 10 · Do not use the speed change lever while the tool is running. The tool may be damaged. 001897 Selecting action mode This tool has an action mode change lever. For drilling, depress the lock button and then slide the action mode change lever to the left ( symbol). [. . . ] Omaha, NE 68127 (402) 597-2925 OREGON 828 19th Avenue. , N. W. Portland, OR 97209 (503) 222-1823 WASHINGTON 22220 84th Ave. A Kent, WA 98032 (253) 395-8055 KANSAS 8819 W. Overland Park, KS 66212 (913) 642-1111 NEVADA 3375 S. [. . . ]