User manual MAKITA 6820V

[. . . ] Be sure that you understand their meaning before use. DOUBLE INSULATION Only for EU countries Do not dispose of electric equipment together with household waste material!In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. For European countries only Noise and Vibration ENG003-2-V2 EC-DECLARATION OF CONFORMITY ENH101-5 The typical A-weighted sound pressure level is 81 dB (A). The noise level under working may exceed 85 dB (A). [. . . ] If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the power source and/ or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Follow instruction for lubricating and changing accessories. 4 25. Keep handles dry, clean and free from oil and grease. Switch action (Fig. 5) CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. [. . . ] Initially, adjust the locator so that the tip of the locator is flush with the base of the screw head. One full turn of the locator equals 1. 5 mm change in depth. After adjusting the locator, unlock the locking sleeve. Turn the locking sleeve slightly so that the protrusions on the locking sleeve engage in the notches in the locator. [. . . ]