User manual MAKITA BBO180

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. gEB021-4 IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE 1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. [. . . ] €¢ Hold the tool and the battery cartridge firmly when installing or removing battery cartridge. Failure to hold the tool and the battery cartridge firmly may cause them to slip off your hands and result in damage to the tool and battery cartridge and a personal injury. To remove the battery cartridge, slide it from the tool while sliding the button on the front of the cartridge. To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Insert it all the way until it locks in place with a little click. middle Low 012897 Installing or removing battery cartridge (Fig. CAUTION: • Always install the battery cartridge fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. €¢ Do not install the battery cartridge forcibly. If the cartridge does not slide in easily, it is not being inserted correctly. ASSEMBLY CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. 4) To install the abrasive disc, first remove all dirt or foreign matter from the pad. Then attach the abrasive disc to the pad. Be careful to align the holes in the abrasive disc with those in the pad. installing dust bag (optional accessory) (Fig. 5) Install the dust bag on the tool with its mouth directing downwards. 2) Lithium-ion batteries with a star marking are equipped with a protection system. This system automatically cuts off power to the tool to extend battery life. Apply wax to the sponge pad or work surface. Run the tool at low speed to smooth out wax. Removing dust box and paper filter bag (Fig. 10 & 11) Remove the dust nozzle by pushing the two latches. [. . . ] Excessive pressure may decrease the polishing efficiency and cause motor overload, resulting in tool malfunction. 7 ENG905-1 ENH101-15 Noise The typical A-weighted noise level determined according to EN60745: Model BBO140 Sound pressure level (LpA): 78 dB (A) Uncertainty (K): 3 dB (A) The noise level under working may exceed 80 dB (A). Model BBO180 Sound pressure level (LpA): 77 dB (A) Uncertainty (K): 3 dB (A) The noise level under working may exceed 80 dB (A). Wear ear protection ENG900-1 For European countries only EC Declaration of Conformity We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s): Designation of Machine: Cordless Random Orbit Sander Model No. [. . . ]