User manual MAKITA BCM3310

[. . . ] Read this instruction manual carefully before putting the Brush Cutter / String Trimmer into operation and strictly observe the safety regulation!Thank you very much for purchasing MAKITA Brush Cutter/String Trimmer. We are pleased to recommend to you the MAKITA Brush Cutter/String Trimmer which is the result of a long development program and many years of knowledge and experience. Please read this booklet which refers in detail to the various points that will demonstrate its outstanding performance. [. . . ] When operating the brush cutter, uncontrollable kickback may occur. This is particularly the case when attempting to cut within a blade segment between 12 and 2 o'clock. Never use the brush cutter within a segment between 12 and 2 o'clock. Never apply the blade of brush cutter to solids, such as bushes and trees, etc. , having a diameter in excess of 3 cm or the brush cutter will be deflected at great force with the risk of injuries. To avoid kickback, ensure the following : - Operation within a blade segment between 12 and 2 o'clock presents positive hazards, especially in using metal cutting tools. - Cutting operations within a blade segment between 11 and 12 o'clock, and between 2 and 5 o'clock, must only be performed by trained and experienced operators, and then only at their own risk. Easy cutting with almost no kickback is possible within a blade segment between 8 and 11 o'clock. - The condition of the Brush Cutter/String Trimmer must be checked before operation, in particular of the cutting tool, the protective devices and also the shoulder strap. Special attention must be paid to the cutting blade which must be correctly sharpened. - Stop the engine and remove spark plug connector when replacing or sharpening cutting tools, and also when cleaning the machine or cutting tool. - Operate the Brush Cutter/String Trimmer with as little noise and contamination as possible. - Always store the Brush Cutter /String Trimmer in locked rooms and with a emptied fuel tank. - Do not perform any modifications on the Brush Cutter/String Trimmer as this will endanger your safety. - The performance of maintenance or repair work by the user is limited to those activities as described in this instruction manual. All other works are to be done by an Authorized Service Agent. Use only genuine spare parts and accessories supplied by MAKITA. Use of non-approved accessories and tools means increased risk of accidents. MAKITA will not accept any liability for accidents or damage caused by the use of non-approved cutting tools and fixing devices of cutting tools, or accessories. Make sure that a first-aid box is available in the vicinity of the cutting operations in case of accident. Line size Gear Case Assy Clutch Case Assy Arbor size Gear ratio Anti-Vib Number Brgs Drum dia. Mixture of gasoline and lubricanting oil (ratio 50:1) Two-stroke motor oil FC 0. [. . . ] - Check the blade or the nylon cutting head for damage and make sure it is firmly mounted. - Check if there is sufficient difference between idling and engagement speed. Make sure that the cutting tool does not rotate while the engine is idling. Take out the air-filter (C) and clean it in warm soapy water. [. . . ]