User manual MAKITA BHP452SHE

[. . . ] ENGLISH INSTRUCTION MANUAL Cordless Percussion-Driver Drill BHP442 BHP452 008357 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. 1 ENGLISH SPECIFICATIONS Model Concrete Steel Capacities Wood Wood screw Machine screw No load speed (min ) -1 BHP442 13 mm 13 mm 38 mm 6 mm x 75 mm M6 0 - 1, 400 0 - 400 0 - 21, 000 0 - 6, 000 215 mm 1. 7 kg (BL1430) D. C. 14. 4 V BHP452 10 mm x 89 mm M6 0 - 1, 500 0 - 400 0 - 22, 500 0 - 6, 000 215 mm 1. 8 kg (BL1830) D. C. [. . . ] Be sure no one is below when using the tool in high locations. Do not touch the bit or the workpiece immediately after operation; they may be extremely hot and could burn your skin. Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data. SAVE THESE INSTRUCTIONS. WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. ENC007-2 IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE 1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. Do not short the battery cartridge: (1) Do not touch the terminals with any 2. 3. 4. SPECIFIC SAFETY RULES DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence 4 5. 6. 7. 8. conductive material. Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc. (3) Do not expose battery cartridge to water or rain. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50 C (122 F). Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire. Be careful not to drop or strike battery. (2) · · cartridge. To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Always insert it all the way until it locks in place with a little click. If you can see the red part on the upper side of the button, it is not locked completely. [. . . ] Drilling in metal To prevent the bit from slipping when starting a hole, make an indentation with a center-punch and hammer at the point to be drilled. Place the point of the bit in the indentation and start drilling. Use a cutting lubricant when drilling metals. The exceptions are iron and brass which should be drilled dry. · · MAINTENANCE · NOTE: · When driving wood screws, predrill pilot holes to make driving easier and to prevent splitting of the workpiece. [. . . ]