Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAKITA BHR243. We hope that this MAKITA BHR243 user guide will be useful to you.
Lastmanuals help download the user guide MAKITA BHR243.
Detailed instructions for use are in the User's Guide.
[. . . ] 18 V • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. Specifications and battery cartridge may differ from country to country. Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE043-1
BHR243 24 mm 13 mm 27 mm 0 – 950 0 – 4, 700 353 mm 3. It is also suitable for drilling without impact in wood, metal, ceramic and plastic. [. . . ] CAUTION: • Always check the direction of rotation before operation. Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. When not operating the tool, always set the reversing switch lever to the neutral position. Forcing the action mode changing knob may cause tool damage. Torque limiter
The torque limiter will actuate when a certain torque level is reached. The motor will disengage from the output shaft. When this happens, the bit will stop turning. CAUTION: • As soon as the torque limiter actuates, switch off the tool immediately. This will help prevent premature wear of the tool. Hole saws cannot be used with this tool. They tend to pinch or catch easily in the hole. This will cause the torque limiter to actuate too frequently. 4)
This tool has a reversing switch to change the direction of rotation. Removing the quick change chuck for SDS-plus (Fig. 5) CAUTION: • Before removing the quick change chuck for SDS-plus, always remove the bit. Grasp the change cover of the quick change chuck for SDS-plus and turn in the direction of the arrow until the change cover line moves from the symbol to the symbol. Pull forcefully in the direction of the arrow. attaching the quick change drill chuck (Fig. 6) Check the line of the quick change drill chuck shows the symbol. attaching the quick change drill chuck (Fig. Place the quick change drill chuck on the spindle of the tool. [. . . ] The depth gauge is convenient for drilling holes of uniform depth. • Always secure small workpieces in a vise or similar hold-down device. Adjust the depth gauge to the desired depth and tighten the side grip. NOTE: • The depth gauge cannot be used at the position where the depth gauge strikes against the gear housing. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA BHR243
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA BHR243 will begin.
