User manual MAKITA BJR181RF

[. . . ] ENGLISH Cordless Recipro Saw MODEL BJR181 006896 INSTRUCTION MANUAL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. SPECIFICATIONS Model Length of stroke Strokes per minute(min ) Pipe Max. cutting capacities Wood Overall length Net weight Rated voltage 255 mm 499 mm 3. 7 kg D. C. 18 V -1 BJR181 28 mm 0 - 2, 900 130 mm · Due to our continuing programme of research and development, the specifications herein are subject to change without notice. [. . . ] Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Follow instruction for lubricating and changing accessories. Keep handles dry, clean and free from oil and grease. SPECIFIC SAFETY RULES GEB008-2 DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to recipro saw safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury. 1. Hold power tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control. Ordinary eye or sun glasses are NOT safety glasses. Inspect workpiece for any nails and remove them before operation. Check for the proper clearance beyond the workpiece before cutting so that the blade will not strike the floor, workbench, etc. Make sure the blade is not contacting the workpiece before the switch is turned on. Keep hands away from moving parts. 7. Always switch off and wait for the blade to come to a complete stop before removing the blade from the workpiece. [. . . ] In this case, rotate the blade clamp lever fully again, then make sure that the blade clamp lever locked at the released position . 1 1. Blade clamp lever 8 OPERATION 006903 CAUTION: Always press the shoe firmly against the workpiece during operation. If the shoe is held away from the workpiece during operation, strong vibration and/or twisting will be produced, causing the blade to snap dangerously. · Always wear gloves to protect your hands from hot flying chips when cutting metal. [. . . ]