User manual MAKITA BJS161Z

[. . . ] ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Metal Shear BJS160 BJS161 BJS100 BJS101 010082 IMPORTANT: Read Before Using. 1 ENGLISH (Original instructions) SPECIFICATIONS Model Steel up to 400 N/mm2 Max. cutting capacities Steel up to 600 N/mm2 Aluminum up to 200 N/mm2 Min. cutting radius Strokes per minute (min-1) Overall length Net weight Rated voltage 1. 9 kg D. C. 14. 4V BJS160 BJS161 BJS100 BJS101 1. 6 mm (16 ga. ) 1. 2 mm (18 ga. ) 2. 5 mm (13 ga. ) 250 mm 4, 300 362 mm 2. 0 kg D. C. [. . . ] Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. Service 28. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Follow instruction for lubricating and changing accessories. Keep handles dry, clean and free from oil and grease. GEB067-1 2. 3. 4. 5. CORDLESS SHEAR SAFETY WARNINGS 1. [. . . ] There may be a slight difference between clearance of both sides of the center blade. Check the smaller clearance with the thickness gauge and adjust it. When using the thickness gauge to adjust the blade clearance, refer to the table. Workpiece thickness (mm) Less than 0. 8 0. 8 - 1. 3 More than 1. 3 006428 010090 Marking on thickness gauge 0. 5 1. 0 1. 5 Turn the tool on and set front ends of the side blades on the workpiece. Now simply move the tool forward, keeping the side blades flush with the workpiece surface. After adjusting the clearance, tighten the screw securely. Storing hex wrench 1. [. . . ]