User manual MAKITA BLS712

[. . . ] Cordless Slide Compound Saw Equipped with Electric Blade Brake 190 mm (7-1/2") MODEL BLS712 002165 INSTRUCTION MANUAL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. SPECIFICATIONS Blade diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 mm (7-1/2") Hole (arbor) diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Miter angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Left 47°, Right 57° Max. [. . . ] Adjust the adjusting screw so that the blade stops at the desired position when lowering the handle fully. 1 2 1. Stopper arm 14 002197 1 Adjusting the miter angle Loosen the grip by turning counterclockwise. Turn the turn base while pressing down the lock lever. When you have moved the grip to the position where the pointer points to the desired angle on the miter scale, securely tighten the grip clockwise. CAUTION: When turning the turn base, be sure to raise the handle fully. After changing the miter angle, always secure the turn base by tightening the grip firmly. 5 4 1. 5. 2 3 Turn base Miter scale Pointer Grip Lock lever · · 002198 Adjusting the bevel angle To adjust the bevel angle, loosen the lever at the rear of the tool counterclockwise. Push the handle to the left to tilt the saw blade until the pointer points to the desired angle on the bevel scale. Then tighten the lever clockwise firmly to secure the arm. 1 1. Lever · 002199 CAUTION: When tilting the saw blade, be sure to raise the handle fully. After changing the bevel angle, always secure the arm by tightening the lever clockwise. When changing bevel angles, be sure to position the kerf boards appropriately as explained in the "Positioning kerf boards" section. · 1 · 3 2 1. Arm 001811 Switch action · CAUTION: Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. When not using the tool, remove the lock-off button and store it in a secure place. Switch trigger · · Do not pull the switch trigger hard without pressing in the lock-off button. This can cause switch breakage. To prevent the switch trigger from being accidentally pulled, a lock-off button is provided. To start the tool, press in the lockoff button and pull the switch trigger. WARNING: NEVER use tool without a fully operative switch trigger. Any tool with an inoperative switch is HIGHLY DANGEROUS and must be repaired before further usage. For your safety, this tool is equipped with a lock-off button which prevents the tool from unintended starting. NEVER use the tool if it runs when you simply pull the switch trigger without pressing the lock-off button. Return tool to a Makita service center for proper repairs BEFORE further usage. [. . . ] Magazine/Newspaper From dealer Store display Catalog Other ( ) 2. Construction trade Industrial maintenance Home maintenance Other ( ) 4. Design Features Size Price Makita Brand Power Other ( ) 5. Any comments? Paste Date Purchased Month Day Year 20 Model No. Paste Serial No. Initial Last Name Male Female Single Married Paste Street Address Paste City Province Postal Code Paste AGE: Occupation: Under 19 20-29 30-39 40-49 Over 50 Paste Dealer's Name & Address: 34 Paste Paste Paste Paste Paste Paste Paste Paste Paste Paste Paste Paste Paste Paste Certificate of Warranty Mail to Makita Factory Service Centres Head Office: Regional Office: Regional Office: (Montreal) Dartmouth: Ville St. [. . . ]