User manual MAKITA BMR102

[. . . ] Be sure that you understand their meaning before use. 5 ❏ Only for EU countries Do not dispose of electric equipment or battery pack together with household waste material!In observance of European Directive 2002/96/EC on waste electric and electronic equipment, 2006/66/EC on batteries and accumulators and waste batteries and accumulators and their implementation in accordance with national laws, electric equipment and battery pack that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. 7 ENGLISH (Original instructions) IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: 1. [. . . ] Return the battery compartment locker to the original position. Reduced power, distortion and a “stuttering sound” or low battery sign that appears on the display are all the signs that the main battery pack needs to replace. Note: The battery pack can’t be charged via the supplied AC power adaptor. When low battery sign appears and an “E” keeps on flashing is the time to replace the back up batteries. Press button to confirm hour setting, the minute digit will flash. Press the button again to complete clock setting. Operating the radio This radio equips with three tuning methods - Scan tuning, Manual tuning and Memory presets recall. Press the Power button to turn on the radio. Select the required waveband by pressing the Band button. Make sure the rubber bended rod antenna has been well placed for best FM reception. Try to avoid to operate the radio next to computer screen and other equipment which will cause interference to the radio. Press and release Scan button (long press Scan button more than 2 seconds will activate time setting), LCD display will flash Scan symbol and the radio will search and stop automatically when it finds a radio station. Press the Scan button again to pick up the found station. Note: A stereo symbol will appear on the display, if the station found is a stereo station. Note: The radio will continue to search next available stations if you do not press Scan button again when it finds a radio station. Rotate the Tuning/Volume control knob to get required sound level. To turn off the radio, press the Power button. 10 & 11) Install the Soft bended rod antenna as shown in the figure. Note: There is a click in the battery compartment designed to store the removed antenna. 12) Remove the rubber protector and insert the adaptor plug into the DC socket on the front side of the radio. Plug the adaptor into a standard mains socket outlet. Whenever the adaptor is used, the battery pack is automatically disconnected. [. . . ] Setting the radio alarm When the radio alarm is selected, the radio will turn on and play the chosen radio station at the chosen alarm time. The radio alarm will continue for one hour unless turned off by pressing the Power button. Pressing the Power button whilst the alarm is activated will cancel the alarm for 24 hours. Note: When the radio is in low battery status, the radio alarm can’t be activated. [. . . ]