User manual MAKITA BO3700

[. . . ] They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire. For European countries only Noise and Vibration The typical A-weighted sound pressure level is 72 dB (A). The noise level under working may exceed 85 dB (A). ­ The typical weighted root mean square acceleration value is not more than 2. 5 m/s2. [. . . ] Use of these devices can reduce dust-related hazards. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the power source and/ or the battery pack from the power tool before 3. Electrical safety 4. 5. 6. 7. 8. Personal safety 9. 3 making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Follow instruction for lubricating and changing accessories. Keep handles dry, clean and free from oil and grease. GEB021-1 6. 7. 8. 9. Ventilate your work area adequately when you perform sanding operations. Some material contains chemicals which may be toxic. [. . . ] Dust bag 003742 Installing paper dust bag (optional accessory) Place the paper dust bag on the paper dust bag holder with its front side upward. Insert the front fixing cardboard of the paper dust bag into the groove of the paper dust bag holder. 2 1 3 1. Front side of paper dust bag 6 003743 1 Then press the upper part of the front fixing cardboard in arrow direction to hook it onto the claws. 2 1. Upper part 003744 Insert the notch of the paper dust bag into the guide of the paper dust bag holder. [. . . ]