User manual MAKITA BUM168

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAKITA BUM168. We hope that this MAKITA BUM168 user guide will be useful to you.

Lastmanuals help download the user guide MAKITA BUM168.


Mode d'emploi MAKITA BUM168
Download
Manual abstract: user guide MAKITA BUM168

Detailed instructions for use are in the User's Guide.

[. . . ] Turn Shear blade Crank Basic alignment line on the tool housing Pins Recessed part of crank Apply grease Base plate Hole in the base plate of shear blades Oval holes that are overlapped Groove in the undercover Brush Machine oil Hedge shear blade Hedge shear blade cover 33. Blade cover to be always installed before installing the chip receiver 46. 6 kg DC18RC, DC18SD 200 mm • Due to our continuing program of research and development, the specifications herein are subject to change without notice. € Specifications and battery cartridge may differ from country to country. [. . . ] Note 1: The time at which the indication lamp lights up varies by the temperature around the work area and the battery cartridge conditions. 010970 Adjusting the shearing height (Fig. 5) Changing the position of holding the change lever allows three-stepped setting for sheared grass height (10 mm, 20 mm, 30 mm). To change setting, tilt the change lever for the base frame position and with the change lever tilted move it up or down along the tool surface until the protrusion on base frame fits in one of the holes in the tool and release it. Part of base frame and fit the other part of the base frame in the groove in the tool. Installing or removing grass shear blades CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing shear blades. Failure to switch off and remove the battery cartridge from the tool may result in serious injury from accidental start-up. € When replacing the shear blade, always wear gloves without removing blade cover so that hands and face does not directly contact the blade. failure to do so may cause personal injury. NOTE: • Do not wipe off grease from the gear and crank. Failure to do so may cause damage to the tool. € For specific way of removing and installing shear blades refer to the reverse of a package for accessory shear blades. 10) Remove the base frame and place the tool upside down. CAUTION: • Before placing the tool upside down, be sure to remove the base frame. 11) To remove the shear blade, press the locking lever and with the locking lever pressed turn the undercover counterclockwise until the symbol on the undercover is aligned with the symbol ' on the locking lever. 12) Take out the undercover, shear blade and crank in order from the tool. 13) To install the grass shear blade, prepare the crank, undercover and new grass shear blade. 14) Take out the blade cover from the old shear blades and fit it onto the new ones for easy handling during the replacement of blades. 15) Adjust the three pin position so that these pins are lined up at right angle in relation to the basic alignment line on the tool housing. 16) 13 ASSEMBLY CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing or removing blade cover CAUTION: • Be careful not to contact the shear blade when installing or removing the blade cover. Contacting the shear blade may cause personal injuries. [. . . ] failure to do so may cause personal injury. € When replacing the chip receiver, always be careful not to contact the shear blades. • The chip receiver receives cut-off leaves and alleviates collecting thrown-away leaves. This can be installed on either side of the tool. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA BUM168

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA BUM168 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag