User manual MAKITA BUR181

[. . . ] Star marking Lock-off button Shaft Grip Hex bolt Screws Cutter cover Nylon cord eyehole Notch of the nylon cutting head installation port 20. Spring Spool holder Nylon cord Retainer for nylon cord end Spool Shoulder strap Hook Motor housing Lock button SPECIFICATIONS Model No load speed Overall length Cutting diameter with nylon cutting head Net weight Rated voltage Standard battery cartridge(s) Warning: Use only the battery cartridge(s) described. 18 V BL1815 / BL1830 • Due to our continuing program of research and development, the specifications herein are subject to change without notice. € Specifications and battery cartridge may differ from country to country. [. . . ] Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire. Be careful not to drop or strike battery. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. Charge the battery cartridge with room temperature at 10°C - 40°C (50°F - 104°F). Charge the battery cartridge once in every six months if you do not use it for a long period of time. WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. 4) FUNCTIONAL DESCRIPTION WARNING: • Always be sure that the tool is switched off and battery cartridge is removed before adjusting or checking function on the tool. Failure to switch off and remove the battery cartridge may result in serious personal injury from accidental start-up. 9 Installing or removing battery cartridge (Fig. 5) CAUTION: • Always switch off the tool before installing or removing the battery cartridge. € Hold the tool and the battery cartridge firmly when installing or removing battery cartridge. Failure to hold the tool and the battery cartridge firmly may cause them to slip off your hands and result in damage to the tool and battery cartridge and a personal injury. To remove the battery cartridge, slide it from the tool while sliding the button on the front of the cartridge. To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Insert it all the way until it locks in place with a little click. 9 Installing or removing battery cartridge (Fig. CAUTION: • Always install the battery cartridge fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. € Do not install the battery cartridge forcibly. [. . . ] If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. € Nylon cutting head • Nylon cords • Shoulder strap • Goggles • Various type of Makita genuine batteries and chargers NOTE: • Some items in the list may be included in the tool package as standard accessories. They may differ from country to country. Noise ENG905-1 The typical A-weighted noise level determined according to EN786: Model BUR141 Sound pressure level (LpA): 75 dB (A) Sound power level (LWA): 83. [. . . ]