User manual MAKITA CL100DZ

[. . . ] Close attention is necessary when used by or near 2 16. children. Use only manufacturer's recommended attachments. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow. [. . . ] Overcharging shortens the battery service life. Charge the battery cartridge with room temperature at 10 C - 40 C (50 F - 104 F). Let a hot battery cartridge cool down before charging it. 3. IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE 1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. 3. 2. 3. 4. 3 FUNCTIONAL DESCRIPTION · ASSEMBLY · CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing or removing battery cartridge 1. Button 1 Disposing of Dust · · CAUTION: Empty the cleaner before it becomes too full, or the suction force weakens. Be sure to empty out the dust inside the cleaner itself. Failure to do so may cause the filter to be clogged or the motor to be damaged. Suction inlet 2 010015 · · · · Always switch off the tool before insertion or removal of the battery cartridge. To remove the battery cartridge, withdraw it from the tool while pressing the buttons on both sides of the cartridge. To insert the battery cartridge, hold it so that the battery cartridge front shape fits to that of the battery installment opening and slip it into place. Always insert it all the way until it locks in place with a little click. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly. 1 2 010022 In order to drop dust sticking on the filter in the capsule, tap the capsule 4 or 5 times with your hand. Switch trigger 010023 2 Now point suction inlet downwards, turn capsule in direction of arrow in diagram, and disconnect capsule slowly and straight. 1 010016 NOTE: · Dust may spill out when capsule is opened, so be sure to set a garbage bag beneath capsule. Capsule CAUTION: · Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. [. . . ] Cleaner body 1 010021 010018 2 3 Cleaning without nozzle Nozzle + Extension wand (Straight pipe) The extension wand fits in between the nozzle and the cleaner itself. This arrangement is convenient for cleaning a floor while standing erect. 1 You can pick up powder and dust without nozzle. 1. Nozzle 010061 2 010019 3 MAINTENANCE · Corner nozzle Fit on the corner nozzle for cleaning corners and crevices of a car or furniture. Cleaner body CAUTION: Always be sure that the tool is switched off before attempting to perform inspection or maintenance. After use When storing the cleaner, hang it from a nail using the convenient hanger in back. 1 010020 2 010037 7 Cleaning · CAUTION: Never use gasoline, benzine, thinner, alcohol or the like. [. . . ]