Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAKITA DA3011. We hope that this MAKITA DA3011 user guide will be useful to you.
Lastmanuals help download the user guide MAKITA DA3011.
Detailed instructions for use are in the User's Guide.
[. . . ] Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Before plugging in the tool, always check to see that the switch lever actuates properly and returns to the "OFF" position when released. to start the tool , simply squeeze the switch lever. [. . . ] Be sure no one is below when using the tool in high locations. Do not touch the drill bit or the workpiece immediately after operation; they may be extremely hot and could burn your skin. Do not look in the light or see the source of light directly. Then, the lamp lights up the top of the bit. nOTE: · Use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to scratch the lens of lamp, or it may lower the illumination. Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Avoid drilling in material that you suspect contains hidden nails or other things that may cause the bit to bind or break. Always be sure that the side grip is installed securely before operation. screw the side grip on the tool securely. The side grip can be installed on either side of the tool, whichever is convenient. Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Place the chuck key in each of the three holes and tighten clockwise. Be sure to tighten all three chuck holes evenly. To remove the bit, turn the chuck key counterclockwise in just one hole, then loosen the chuck by hand. These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. [. . . ] Hold the tool firmly and exert care when the bit begins to break through the workpiece. ⷠA stuck bit can be removed simply by setting the reversing switch to reverse rotation in order to back out. However, the tool may back out abruptly if you do not hold it firmly. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA DA3011
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA DA3011 will begin.
MAKITA DA3011 9016B (242 ko)
