User manual MAKITA DST300

[. . . ] You are also asked to carefully read the safety regulations in the applicable chapter of this handbook. Important: Read the instruction handbook before using the machine. Keep other people at a safe distance whilst working. Warning: Remove the spark plug lead and read instructions before carrying out any repair or maintenance. [. . . ] 3) Allow the engine to cool before storing in an enclosed space. 4) To reduce the fire hazard, keep the engine, exhaust silencer, battery compartment and fuel storage area free of grass, leaves, or excessive grease. Do not leave containers with grass cuttings in rooms. 5) Check the stone-guard and grass-catcher frequently for wear and deterioration. 6) If the fuel tank has to be drained, this should be done outdoors and when the engine is cool. 7) Wear strong work gloves when removing and reassembling the blade. 8) Keep the blade balanced during sharpening. All operations on the blade (dismantling, sharpening, balancing, remounting and/or replacing) require a certain familiarity and special tools. regular maintenance is essential for safety and performance. 9) For reasons of safety, do not use the equipment with worn or damaged parts. Parts are to be replaced and not repaired. 1 Bring the handle (1) back to its operating position and secure it with the thumb knobs (2). The handle (1) can be height-adjusted in three different positions by loosening the thumb knobs (2) and inserting the pins (3) in one of the three pairs of holes on the brackets. Tighten the thumb knobs (2) securely after adjustment. Fit the starter rope (4-if provided) in the guide (5) and tighten the nut (6). Mount the tray (7-if provided) by pushing the attachments right down until you hear a click. Unscrew the two knobs on the sides (8) to adjust the grip and make it as comfortable as possible. 2 With the plastic part (11) upside-down, fasten the frame (12) to the plastic part using the screws (13). Insert the frame (12) into the sack (14) and attach the plastic profile (15) with the help of a screwdriver, as shown in the drawing. Fit the edge of the cloth (16) right into the groove of the plastic part (11), starting 5-7 mm from the ends. 3 On models with an electric starter, connect the battery cable to the lawnmower’s general cable connection. ROUTINE MAINTENANCE IMPORTANT – Regular, careful maintenance is essential for keeping the safety level and original performance of the machine unchanged in time. [. . . ] If the machine is to remain inactive for a long period, disconnect the battery leads after making sure that the battery is fully charged. 4 To clean inside the machine, use the hosepipe connector (1) provided. Always stand behind the machine's handle when cleaning. 1 Lift the stone-guard and attach the grass-catcher (1) correctly as shown in the drawing. [. . . ]