User manual MAKITA EA3200S

[. . . ] Instruction Manual Manuel d’instructions Manual de instrucciones Manual de Instruções Read this instruction manual carefully before putting the chain saw into operation and strictly observe the safety regulations!We are confident that you will be satisfied with this modern piece of equipment. The EA3200S, EA3201S, EA3202S, EA3203S, EA3201SG, EA3203SG are very handy and robust chain saws with a new Design. The automatic chain lubrication with variable‑flow oil pump and maintenance‑free electronic ignition ensure trouble‑free operation, while the hand‑saving anti‑vibration system and ergonomic grips and controls make work easier, safer, and less tiring for the user. [. . . ] Model EA3201SG and EA3203SG accept Brazilian gasoline (E25). In order to obtain an optimum engine output and to protect your health and the environment use unleaded fuel only. To lubricate the engine, use a synthetic oil for two-stroke aircooled engines (quality grade JASO FC or ISO EGD), which has to be added to the fuel. The engine has been designed for use of MAKITA high-performance two-stroke engine oil and a mixture ratio of only 50:1 to protect the environment. In addition, a long service life and reliable operation with a minimum emission of exhaust gases are ensured. MAKITA high-performance two-stroke engine oil is available in the following sizes to suit your individual requirements: 1 l order number 980 008 607 K100 ml order number 980 008 606 In case MAKITA high-performance two-stroke engine oil is not available, it is urgently recommended to use a mixture ratio of 25:1 with other two-stroke engine oils, as otherwise optimum operation of the engine cannot be guaranteed. Caution: Do not use ready-mixed fuel from petrol stations. NOTE: For preparing the fuel-oil mixture first mix the entire oil quantity with half of the fuel required, then add the remaining fuel. Thoroughly shake the mixture before filling it into the chain saw tank. It is not wise to add more engine oil than specified to ensure safe operation. This will only result in a higher production of combustion residues which will pollute the environment and clog the exhaust channel in the cylinder as well as the muffler. in addition , fuel consumption will rise and performance will decrease. The Storage of Fuel Fuels have a limited storage life. Fuel and fuel mixtures age through evaporation, especially at high temperatures. Aged fuel and fuel mixtures can cause starting problems and damage the engine. Purchase only that amount of fuel, which will be consumed over the next few months. At high temperatures, once fuel has been mixed it should be used up in 6-8 weeks. Store fuel only in proper containers, in dry, cool, secure locations!AVOID SKIN AND EYE CONTACT The correct mixture ratio: 50:1  when using MAKITA high-performance two-stroke engine oil, i. 25:1  when using other synthetic two-stroke engine oils (quality grade JASO FC or ISO EGD), i. Mineral oil products degrease your skin. in addition , allergic reactions are known to occur. [. . . ] Com Spare parts Reliable long-term operation, as well as the safety of your chain saw, depend among other things on the quality of the spare parts used. Only original spare parts and accessories guarantee the highest quality in material, dimensions, function and safety. Original spare parts and accessories can be obtained from your local dealer. He will also have the spare part lists to determine the required spare part numbers, and will be constantly informed about the latest improvements and spare part innovations. [. . . ]