User manual MAKITA HT2460

[. . . ] GB F D I NL E P DK GR HT-2460, HT-2475 PETROL HEDGE TRIMMER TAILLE-HAIE THERMIQUE BENZIN-HECKENSCHERE TAGLIASIEPI A BENZINA BENZINEHEGGENSCHAAR CORTASETOS A GASOLINA APARADOR DE SEBES A GASOLINA BENZINDREVET HÆKKEKLIPPER ΒΕΝΖΙΝΟΚΙΝΗΤΟ ΨΑΛΙΔΙ ΜΠΟΡΝΤΟΥΡΑΣ INSTRUCTION MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE INSTRUCCIONES MANUAL DE INSTRUÇÕES BRUGSANVISNING ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ WARNING: To reduce the RISK of injury, user must read and understand the instruction manual before using the Hedge Trimmer. Manufacturer reserves the right to change specifications without notice. Specifications may differ from country to country. Do only hand over the Hedge Trimmer together with this manual. [. . . ] - Tightly screw on the plug by hand only. - Clean around the screw plug and the tank after refuelling. - Always wipe up any spilt fuel to prevent a fire. Storage of fuel - Fuel cannot be stored for an unlimited period of time. - Purchase only the quantity required for a 4 week operation period. - Use approved fuel storage containers only. 3 meters (10 feet) PRECAUTIONS BEFORE STARTING - Please make sure that there are no children or other people within a working range of 15 meters, also pay attention to any animals in the working vicinity. - Before use always check that the Hedge Trimmer is safe for operation. - Use approved fuel storage containers only. Rotation of the cutting device during idling speed is not allowed. Check with your dealer for adjustment if in doubt. Check for clean and dry handles and test function of the I-O Switch. - Start the Hedge Trimmer only in accordance with the instructions. Do not use any other methods for starting the engine. (See Starting) - Start the hedge Trimmer engine only after the entire assembly is done. Operation of the engine is only permitted after all the appropriate accessories are attached. - Before starting, make sure that the cutting device has no contact with objects such as branches, stones, etc. - Before trimming, inspect area for wires, cords, glass, or other foreign objects which could come in contact with the blade. Be aware of any and all electric lines and electric fences. Check all areas for electrical lines before cutting. Diagrammatic figure 360° 15 meters (50 feet) 10 STARTING THE MACHINE Move at least 3 meters away from the place of refuelling. Place the Hedge Trimmer on a clean area of ground make sure that the cutting tool does not come into contact with the ground or any other objects. [. . . ] - A periodical visual inspection of the felt filter is to be conducted. - For that purpose, open the tank cap, use a wire hook and pull out the suction head through the tank opening. Filters found to have hardened, been polluted or clogged up are to be replaced. - Insufficient fuel supply can result in the admissible maximum speed being exceeded. [. . . ]